how long do you expect the W58 to last behind that thing? r151?
linden was getting a w5x-r151 adaptor made....
Yeah, I noticed that in the R154 adaptor thread. Specifically in the area of the pivot mount. It looses a mounting bolt too...Originally Posted by CrUZida
Personally the current spacer method isn't the most elegant solution either...Originally Posted by CrUZida
Has anyone found a more suitable clutch slave? I'm looking for something that has the bleed nipple on top rather than the side, as even a shorter bleed nipple had to be shortened to clear the exhaust.
Mos.
Admin, I.T., Founding Member, Toymods Car Club Inc.
2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)
how long do you expect the W58 to last behind that thing? r151?
linden was getting a w5x-r151 adaptor made....
hello
Are you on crack?Originally Posted by ed_jza80
Only weighed it as part of the combo
Mos.
Admin, I.T., Founding Member, Toymods Car Club Inc.
2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)
Mine sticks directly to the side from memory.
Once you bleed the clutch though, you'll be fine after that.
I actually bled mine from the engine bay, not under the car.
I also have a braided soft line, and insulation around it.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
thats one heavy blob of a motor your sticking in there mos.
as far as your better weight dist theory goes i reckon its all wrong
with that much power and you behind the wheel i reckon the w58 will last decades.
me behind the wheel and ed will be crying
cheers
linden
Looking good Mos. Pretty sure i used a Hilux slave and there was some clearancing involved.
Reckon you can recall if the VVTi block engine mounts are the same as the non VVTi? Looks like i will ahve to go the whole package to get the better flowing heads want a spare set to port?
Lily Simpson 6.7.2010
R.I.P.
i got a strong dibs on those heads!
ps - block have the same mountings
pps - linden, stay away from my box!
ppps - mos, pics from the other night are up on v-eight
pppps - linden, havent forgotten, still need to talk to you about catch can/separator...
cheers
ed
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
Mos, couple of pics of the slave when it was in the Cressida
http://conceptual.net.au/~peewee/ext...nderside_3.jpg
http://conceptual.net.au/~peewee/ext...ers_side_3.jpg
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Hmm, that one looks like the bleed is slightly more angled than mine - what's that slave off?Originally Posted by CrUZida
I've got literally 10mm between the feed boss and the header, and a heat shield managed to squeeze in there without touching either.
Mos.
Admin, I.T., Founding Member, Toymods Car Club Inc.
2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)
No idea hey.
Could be Supra, Celica, Hilux, anything really.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Mos, if you want a cheap short shifter for the w58 grab one of these JZA80 6 speed ones off ebay.
http://cgi.ebay.com/ebaymotors/93-98...spagenameZWD2V
I've got a remote shifter w58 as well and I fitted one of these a couple a of years back. You just need to grind the bottom section so it's more round and less square.
so the v160 kit works eh damien? whats the length like on the gearstick end? is there much scope to modify this end? i want mine a bit longer, and need to bend it accross to the driver a little more
recent pics of an oldcorolla discovered in australia:
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
"what do you mean you don't want a hole there????"
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
It's pretty much the same height as the stock shifter and you can chuck that aluminium bit which slips over the shaft - it's only for the reverse lockout on the 6 speed. Then you can bend it whichever way you want. Can't go wrong for the price!Originally Posted by ed_jza80
Wow, they look quite good! I'm surprised it fits the W58 remote shifter, but as you said, for the price you can't go wrong - Ed, wanna get two? I've never bought anything off ebay
I'm almost defn gonna get it - the current shifter sits close enough to the handbrake, wouldn't hurt to have it further
Mos.
Admin, I.T., Founding Member, Toymods Car Club Inc.
2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)
Bookmarks