4age Instructions

[imlach74]

theress nothing here about instruction or a detailed despcription on a 4age conversion for a ta22.....

im hoping someone can help me with this or lead me in the direction to find it....and please dont tell me to search because thats why i am here

i need an extensive parts list prices and whats involved

thanks and sorry if im wasting ur time

[Alex]

I see that you're new to toymods so I suggest that you go to "Tech and Conversions" section and use the "search these treads" option , then you will find some info.

I did a quick search myself and there is some info that you are after, good luck

[EVOSTi]

its not an overly hard conversion, theres not alot we can tell you that wont become obvious when you start the converion. obviously a jdm sprinter 4age is prefered as it already has rwd manifolds, and you need a t50 gearbox.
the hardest part is making the engine mounts and its not that difficult if you have a mig welder. you can figure out the water hoses, they are easy, and the wiring loom shouldnt be too bad either.
i have a 4age in my girlfriends ta22 that you could check out if you were in sydney

[LeeRoy]

Go to the forums home page of this site and use the ling down the bottom to go to the old toymods.org sites forums. There is a bit of info - probably more than enough, on putting a 4age into a ta22. Should that not suffice then ask away.

- LeeRoy