Page 17 of 27 FirstFirst ... 71516171819 ... LastLast
Results 241 to 255 of 398

Thread: Project 6-speed

  1. #241
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    As much as the Century would make an excellent tow car, I would never bastardise it with a towbar!

    There's no need to tow the car anyway, I'll just take the measurements to the driveshaft place and fit the finished product myself.

  2. #242
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    Fuel system is finished, and for the first time in 5 years my Supra has a fuel filter! Exactly how it continued to run for so long without one is beyond me, but there you have it. Anyway I fired up the fuel pump and there were no leaks anywhere in the system so I'm calling that a win.

    Later in the week I'll finish my oil cooler install (just need to trim the hoses to length) and I'll be able to start the engine - then it's time to see if the clutch actually works! It better after all the money I've spent on it.

    Please contribute to the Finish Norbie's Supra fund, I need a tailshaft!

  3. #243
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: Project 6-speed

    Quote Originally Posted by Norbie
    Fuel system is finished, and for the first time in 5 years my Supra has a fuel filter! Exactly how it continued to run for so long without one is beyond me...
    driving at WoT all the time allows any dirt to escape thru the injector pintle?
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  4. #244
    MR 18RG Chief Engine Builder The Witzl's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,164

    Default Re: Project 6-speed

    dear lord.... and i thought i cut some corners!

    On a side note Mr Norbie.... i'll be delivering some engines soon. Like maybe even this weekend
    A new promotion at work has meant im allowed to build my engine this year!
    ...... butt scratcher?!


  5. #245
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    Woohoo, more things to throw money at!

  6. #246
    I make people cry Chief Engine Builder Draven's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    4,281

    Default Re: Project 6-speed

    this could be an appropriate place to ask...

    I have some seepage on the bottom of my V161, toward the front on the bit wit hthe metal "vanes".
    What gasket do you reckon has most likely gone?
    http://www.toymods.org.au/forums/showthread.php?t=7465
    Quote Originally Posted by xero View Post
    and of course campbell newman's completely fucking everything he touches so badly that he should be called dick fingers.

  7. #247
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    Qld
    Posts
    56

    Default Re: Project 6-speed

    There is no gasket between the gearbox pieces themselves - just a coating of gasket type cement.

    Any leakage onto the ribs is usually the rear main oil seal on the engine. The weep runs down behind the flywheel and towards the join of the bellhousing on the gearbox. After I replaced my rear seal the leaks all disappeared and stays spotless now.
    Graham D
    Lexus RX350 (no mods yet !!!)
    Lexus IS200 / 2.5GT-T (1JZGTE VVTi + Getrag 6 Speed)
    Lexus IS200 (wife's car and no mods allowed !!!)
    Suzuki GSX750-F

  8. #248
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    Yeah, a leak towards the front would suggest engine rear seal or gearbox front seal. Have you looked inside your bellhousing (via inspection cover) lately? If there's lot of oil in there it's time to drop the gearbox.

  9. #249
    Junior Member Grease Monkey
    Join Date
    Nov 2005
    Location
    Qld
    Posts
    56

    Default Re: Project 6-speed

    What oil are you running in the 6 speed - I have been using Castol Transmax Z but are going to change to Royal Purple Syncromax. Just had an expensive rebuild with new synchros and it is still difficult to change 1-2. M5 owners are switching to Synchromax to solve their gear change problems with their Getrags.
    Graham D
    Lexus RX350 (no mods yet !!!)
    Lexus IS200 / 2.5GT-T (1JZGTE VVTi + Getrag 6 Speed)
    Lexus IS200 (wife's car and no mods allowed !!!)
    Suzuki GSX750-F

  10. #250
    I make people cry Chief Engine Builder Draven's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    4,281

    Default Re: Project 6-speed

    Royal purple is, by all accounts, pretty good.

    personally, I just use Toyota stuff.
    http://www.toymods.org.au/forums/showthread.php?t=7465
    Quote Originally Posted by xero View Post
    and of course campbell newman's completely fucking everything he touches so badly that he should be called dick fingers.

  11. #251
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    Toyota stuff is apparently no longer in production. I'm using Dexron III.

  12. #252
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Project 6-speed

    I was all excited about ordering my new driveshaft this week, until a letter from Qld Transport arrived in the mail - rego for the Century, $850 if you please.

    Maybe I'll get the car back on the road some time this year!

  13. #253
    Junior Member Backyard Mechanic haison's Avatar
    Join Date
    Dec 2005
    Location
    Vic
    Posts
    447

    Default Re: Project 6-speed

    $850??? feckinell!! Does rego costs there change depending on car?
    1984 MA61 - http://www.toymods.net/forums/showthread.php?t=12340
    1972 RT81 - http://www.toymods.net/forums/showthread.php?t=24160
    RObErT_RaTh - I think it's fair to say we all love the bush
    Viper_Nipplex - If bush is this popular, just wait until the boxes are ready

  14. #254
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: Project 6-speed

    Quote Originally Posted by haison
    $850??? feckinell!! Does rego costs there change depending on car?
    Cylinders

    More -> ouch

    Cheers
    Wilob

  15. #255
    Party Animal Supreme Too Much Toyota MR 1JZ's Avatar
    Join Date
    Sep 2005
    Location
    South Australia
    Posts
    6,576

    Default Re: Project 6-speed

    Quote Originally Posted by wilbo666
    Wilob
    lololol............
    Project Soarer II - Sold
    Evo 5 - The silver fruitbox
    "I'm the man who has the ball. I'm the man who can throw it faster than f**k. So that is why i am better than everyone in the world. Kiss my ass and suck my dick... everyone."

Similar Threads

  1. Classic celica suspension TA23
    By WindeX in forum Tech and Conversions
    Replies: 42
    Last Post: 12-01-2007, 09:54 PM
  2. KE 35 conversion from 2 to 3 speed (auto)
    By woody012 in forum Tech and Conversions
    Replies: 2
    Last Post: 02-01-2006, 11:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •