all im going to say is, the best ones in australia cost around $15k and there is only a couple of people that know how to build them properly in this country.
The basic recipe isnt hard, but its very hard to have the high HP ones that last!
A cheap good way to do it is, Argo rods and acl pistons etc and oversize the 4ag valves and work the hell out of the head,with good springs, good buckets and keep the limit under 8000rpm.
I have given many hints away as to what the top one in the country has in it {search for it}but i got in trouble for giving hints or as was said teasing so you will have to search for the info!!!!
Loftus wouldnt be close to the HP that can be had for an engine that will last as i know exactly what every big 7a is making.
I will ask this, what is the point in telling anyone one on here how to make a good one when they are not going to spend the $15k to do the work thats needed to make the power? I can tell you how to make 700hp out of a 6 litre chev, but whom is going to spend the $80k!!!!!
But then again, it would be good to just know so some people can just tell there friends that will never use it
Bookmarks