wiring diagram for AE111

[tomcat]

Hi Guys , Anyone out there in cyberworld have a wiring diagram for a AE111 96 model that I can access . In the process of trying to make a loom for the clubman I'm building & a lot of the wiring in the half cut was disconnected before I got to it. Any help greatly appreciated
Regards Tomcat.

[-GT-]

There's a manual for the blacktop floating around somewhere, i have it but can't upload it. Have a look round the tech docs/search the faqs, i'm pretty sure there's a link to it somewhere on here.

If not, it was definately up on the old forums, so search there next. (www.toymods.org.au - or there's a link to the old forums on the front page here, down the bottom.)

[bobob]

Maybe some of this will help..

http://www.onthenet.com.au/~paulp/Blacktop/

Not knowing what bit you are trying to wire, but it does have the EFI section which has pinouts for the ECU etc..

[-GT-]

Or that Should be wiring diagrams in there somewhere? Been a while since i looked through mine.

[JP]

the blacktop manual posted doesn't contain the wiring diagram schematics from memory.

This guy has a fair amount of info on his site, most of it is correct:

http://www.padandwheels.com/mr2/blac...ngharness.html
http://www.padandwheels.com/mr2/blac...dyharness.html

You can use the schematic diagram from the AE101 20V at club4ag for the AE111. The only main differences are the MAP sensor instead of AFM, external intake air temp sensor instead of the one in the AFM, and the circuit opening relay wiring (AE101 switched by the AFM, AE111 switched by FC on the ECU)

http://www.club4ag.com/faq%20and%20t...V%20Silver.htm

[FASTFOO]

PM me a fax #
I Should be able to help.
MATT.

P.S. And it will be right unlike a lot of internet crap.

[Dimitri]

pin outs are on the tech referance at clu4ag.com.

[Matt-AE86]

pin outs are on the tech referance at clu4ag.com.

http://www.club4ag.com/faq%20and%20t..._20v_Black.htm

Direct link added.