Page 3 of 5 FirstFirst 12345 LastLast
Results 31 to 45 of 64

Thread: CCG Dynoday - 22 October 2006 - All welcome!

  1. #31
    K Power Grease Monkey Damo82's Avatar
    Join Date
    Oct 2005
    Location
    Canberra
    Posts
    120

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Yeah the silver JZA80 made it back on (apparently the wastegate was stuck open on his earlier run). He pulled 280rwkw or there abouts and wasn't overly happy with that figure.

  2. #32
    Junior Member Domestic Engineer Sprinterboy's Avatar
    Join Date
    Dec 2005
    Location
    ACT
    Posts
    507

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    My appoligies for not bring the 86 peoples, had a few other personal issues on sunday and too boot the car's radiator isn't quiet finished........

    No suprises, evertimeit gets so close something pushes it back


    Congrats for the great day, Will be out next time..... I Promis



    <--<--<--<--<--<--<-----Thanks Justen
    Last edited by Sprinterboy; 23-10-2006 at 04:24 PM.

  3. #33
    Underpowered Backyard Mechanic Moppitt's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    361

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    What I still dont get though is why did it try to climb out of the rollers so hard the first time even though it was making "only" 120kw or less? I didnt get to stay around to watch the second attempt because of study pressures

  4. #34
    how much is Too Much Toyota JustenGT8's Avatar
    Join Date
    Oct 2005
    Location
    ACT
    Posts
    5,795

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Did anyone happen to get any footage of the GT8 on the dyno? Suitable recompense for sending me the mpeg
    Lily Simpson 6.7.2010
    R.I.P.

  5. #35
    Junior Member 1st year Apprentice
    Join Date
    Dec 2005
    Location
    ACT
    Posts
    47

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Quote Originally Posted by JustenGT8
    It would be awesome to see a local a 2J run the huge numbers you hear about so often.
    Niko's supra (the silver one) should've pulled about 330rwkw's.. it was dyno'd about 4 weeks ealier at that level, I'm not sure what Ross's pulled (the Blue jza80), I think it was about 309rwkw after about 10 runs on the dyno and it pulling 110rwkw!!

    I'm not really sure why they both weren't strapped down to begin with, they both were expecting big numbers.. perhaps pulford doesn't respect the 2jz powah

  6. #36
    Lord of InterpretiveDance Chief Engine Builder tomvale13's Avatar
    Join Date
    Jul 2006
    Location
    Convictania
    Posts
    3,093

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Just a quick one,
    No: 2 on the list of people going; Jane with the EP82 starlet; is she a member of this site and from Canberra..?
    I only ask cos I havent seen any other Starlet GT's in Canberra and thought mine was the only one for a while there.
    Anyone know if she showed up and if so how did the little Starbo go..?
    Thanks.
    Oh and I'll be up for the next one of these events; should have my forged 5efhe in by then!

  7. #37
    Junior Member Domestic Engineer shelldrake's Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    443

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Results!!!!???!!!!!:d
    Assumption is the mother of all f**kups...

  8. #38
    ethanol sniffing Backyard Mechanic adamaw11's Avatar
    Join Date
    Dec 2005
    Location
    Qld
    Posts
    328

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Yeah I just wanna see some official list of results!
    http://www.toymods.org.au/forums/showthread.php?t=83259
    '88 A.D.M aw11 '98 4age 20v blacktop
    NA: 14.745@150kmh at willowbank. On E85 with 6psi boost: 13.573@165kmh. ~8psi: 13.187 @169.9kmh. >10psi: 12.9 rod fragments @ 174mm holes in block
    daily: '93 ae101 Levin coupe. Motorbike: '09 Suzuki GSR600: 12.358@179kmh at Willowbank

  9. #39
    Junior Member Domestic Engineer shelldrake's Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    443

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Who has the list? The dyno would still have the day on file i reckon....I'm really keen to see how you guys went - I just had my setup dynoed today, and was a little dissapointed.(80kw) Admittingly there is quite some room for improvement - Eg, Proper tuning of the carbs, perhaps an upgrade to 45's....
    Assumption is the mother of all f**kups...

  10. #40
    Canberra Celica Group Grease Monkey TWEETY's Avatar
    Join Date
    Dec 2005
    Location
    ACT
    Posts
    112

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    We have the catagories, trophies and winners sorted out now so come along to the Beer Oclock at the YAMBA CLUB in woden (not Lanyon Club) and see the results. For all you interstaters we will get them out after the Beer Oclock!.
    Cheers
    Mitch
    3TGT TA22 'Tweety' Canberra Celica Group (CCG) = www.canberracelica.org
    147 RWKW / NIL quarter mile / 2D:1h:12m Wakefield / NIL Hillclimb.....but 1/8th mile at Dubbo = 10.53

  11. #41
    how much is Too Much Toyota JustenGT8's Avatar
    Join Date
    Oct 2005
    Location
    ACT
    Posts
    5,795

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Yamba club now? We're having a baby thurs so i'll try to get there but no promises....i still vote for Vikings at Erindale
    Lily Simpson 6.7.2010
    R.I.P.

  12. #42
    Junior Member Domestic Engineer shelldrake's Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    443

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    I can't wait that long...I want results now!!!!!! Fair enough. One of these days the classic celica club of victoria should meet up with you guys halfway....
    Assumption is the mother of all f**kups...

  13. #43
    Junior Member Too Much Toyota YLD-16L's Avatar
    Join Date
    Sep 2005
    Location
    ACT
    Posts
    6,193

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Quote Originally Posted by shelldrake
    One of these days the classic celica club of victoria should meet up with you guys halfway....
    Halfway - The bridge between Albury and Wodonga
    My KE25 thread
    WSID - 12.8@108mph || Wakefield Park - 1:11.4 || SDMA Hillclimb - 49.1

  14. #44
    Junior Member Domestic Engineer shelldrake's Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    443

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    soooo....about those dyno results...
    Assumption is the mother of all f**kups...

  15. #45
    Canberra Celica Group Grease Monkey TWEETY's Avatar
    Join Date
    Dec 2005
    Location
    ACT
    Posts
    112

    Default Re: CCG Dynoday - 22 October 2006 - All welcome!

    Many thanks to Anthony from the MR2 Club as he has uploaded some of the photos at:.
    http://www.mr2club.com.au/mr2act/Oct...Day/index.html
    Results to follow shortly!
    Cheers
    Mitch & Phil
    3TGT TA22 'Tweety' Canberra Celica Group (CCG) = www.canberracelica.org
    147 RWKW / NIL quarter mile / 2D:1h:12m Wakefield / NIL Hillclimb.....but 1/8th mile at Dubbo = 10.53

Similar Threads

  1. Replies: 85
    Last Post: 26-10-2006, 06:39 PM
  2. Replies: 342
    Last Post: 22-10-2006, 09:20 PM
  3. CCG DYNODAY - 26 March 2006
    By TWEETY in forum ACT Events
    Replies: 24
    Last Post: 07-04-2006, 07:34 PM
  4. Toymods AGM 2006 - Mon 20th Feb
    By ZZE92 in forum Toymods Car Club Membership and Feedback
    Replies: 1
    Last Post: 08-02-2006, 06:23 PM
  5. Replies: 6
    Last Post: 10-01-2006, 02:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •