std altezza 3sge on chassis dyno

[Celica RA45]

wonting to know if any 1 here has put 1 of these engines on a chassis dyno ,example dyno dynamics dyno in shoot out mode was it fwd or rwd and was it std with factory ecu or did it have a aftermarket 1 on it ,also was plunem changed or std 1
the reason trying to see what they make std and modified
Motec had a std auto 1 on years ago which made 201 hp at 7600 rpm but that was engine dyno cheers for any replys

[Billzilla]

Probably not much help, but I had the Fraser on a Dyno Dynamics dyno and it made 110hp at the wheels.
Mods - Single cat converter & muffler after the factory extractors, quad throttles, Motec M400, dry sump.
Don't know what config the dyno was in sorry.

All stock otherwise - I would have thought it would have made a lot more myself ....
(FWIW, that's exactly the same as the 4AGE I built a couple of years ago)

[Celica RA45]

you sure thats not 110 kws bill

[Billzilla]

you sure thats not 110 kws bill

I'm pretty sure Matt's dyno reads in HP.

[Celica RA45]

charlies mr2 aw11 has a red top beams and on the dyno dynamic dyno made 110kws at 6500 rpm so thats a fwd so not to sure how that works out as they made 190 ps from the factory

[urantia]

That isn't very impressive at all bill, that is for a non stock rwd altezza dual vvti beams motor?

Charlie's redtop putting out 110rwkw sounds about right, 190hp /142kw minus %30 drive train loss (that's bieng unfair as it's likely much less) = 99rwkw rouphly speaking.

The blacktop i installed in my cousins mr2 made about 117rwkw if i remember correctly. (will have to ask him again, as he was having fueling probs with the stock aw11 fuel pump.)

[WindeX]

Hmmmm, but thats the joys of dynos.... Bills(I gamble) would be insainly fast, its all in how the dyno is setup.

[urantia]

true

btw any fwd beams motors forsale at the moment i'm in the market.