Gizzmo Boost Controller

[Mr Ed]

1. Sir_2jza70 (MS-IBC; Brisi)
2. MrDOHC (MS-IBC; Qld??)
3. Pube (MS-IBC; Sydney)
4. Chris Davey (IBC, Sunny Coast)

ANything over $1000 total including postage will attract GST. I think it may work out cheaper to get it from that NZ Performance place individually.

Good point. Perhaps I will persuade him to give the good price for an order of 10+, but shipping to different addresses.

[Pube]

MS-IBC,Sydney

[Ghetto-AW11]

Ok guys, my car has been tuned up to 20 psi and running this on closed loop so it monitors and adjusts the boost to keep it solid it had NO spiking at all, it holds the boost rock solid in every gear. It comes on hard, and stays at the set duty cycle. I actually set it up with the tuner and programing in a boost setting takes literrally 15seconds. Only issue is pressing both buttons at exactly the same time to jump menus.... maybe im just retarded.

I have 4 boost settings out of a possible 6, and its single press of a button to swap between them, works VERY well.


I have a dedicated boost guage because the gizzmo does not read vacum! It works fine as a boost guage, and even easier to read than a dial guage BUT, i also like the look of a nice autometer guage, with my gizzmo tucked away and hidden from the prying eye. Great spot is in the drop down draw under the streering column! But thats not where i have mine

[Mr Ed]

Having trouble getting numbers so I am currently inviting a few other forums to join the GB.

More = merrier

[Mr Ed]

Not getting alot of interest in this. People please keep in mind the prices arent final yet, just need to judge how many people are potentially interested before I spend hours shopping around.

Hate to sound like a wanker but Ive got better things to do with my time than waste it shopping for a deal which isnt even possible.

Anyone got a slight interest? Maybe let me know what sort of price it would take to get you on board??

[chris davey]

I would hope to get it for about $350 delivered. I can get it for $390 or so delivered from NZ performance.

[Mr Ed]

I would hope to get it for about $350 delivered. I can get it for $390 or so delivered from NZ performance.

Sounds doable. Im hoping to get an MS-IBC for $400 delivered so if I can do and the IBC for $350 we'd be laughing.

[Pube]

I checked at autobarn today. They sell the IBC for $400

[kugzs]

does anyone work at a place that sells them. What price are you able to get?

[mojo_type]

id be interested in the ms-ibc to perth but not for a month or so as i just realised my brake booster is fooked

[Mr Ed]

I checked at autobarn today. They sell the IBC for $400

Did they stock the MS-IBC? If so, how much?

I might just have a chat to a bloke I know that works there and see if theyd do a good GB deal.

[Pube]

I asked them about the ms-ibc and they had no idea such thing existed!! I guess they are newish and havent got around yet?

[Ghetto-AW11]

yeah, it was a new model. I got mine and it had the IBC manual in the box....! So i emailed gizzmo because their website didnt even have instructions and then 30mins later they posted the real instructions to their website.

[Mr Ed]

GB cancelled due to a lack of interest. Sorry to anyone who had their heart set on it going through.

[ProjectSleeper]

Thats a pity it has to be cancelled...

If anyone was holding back because they were afraid of no local support, rest assured that they ARE able to support the product 100%.
I was speaking with Ray from Gizzmo and he tells me that they are opening up here in Melbourne by December. They are really keen on setting up a facility here, so there will be local support and local technical advice etc...