Page 4 of 4 FirstFirst ... 234
Results 46 to 59 of 59

Thread: Securing your number plate

  1. #46
    Senior Citizen Chief Engine Builder "Z" UTE's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    3,059

    Default Re: Securing your number plate

    No one has mentioned this, ensure you get a copy of the loss report from the police station. Keep it in a safe place. Then you have the paperwork to back you up, when all the tickets turn up.

    If your plates are marginally harder to steal than the plates on the car next to yours, you wont loose em. Anything that will slow the thief down, will deter them. They always go for the easy targets.

    cheers Chuck.
    "What man can build, man can fix!"
    MS51Crown Coupe,
    GSV40R Aurion luxo tourer. One TA22 currently receiving some TLC prior to paint One RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. Toyota Crown RS47J ute in need of serious TLC. Toyota Crown Custom Wagon MS53 daily hauler stocko!

  2. #47
    AGE-16V Automotive Encyclopaedia Dimmy's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    862

    Default Re: Securing your number plate

    On my previous car i had the plates stolen so i made a police report ASAP and ordered new ones. Luckily for that police report because a few weeks later i got a letter from caltex saying i owed the ~$12000 to repair a fuel bowser thing

    Since then i've used screws that require allan keys and havent had a problem since *fingers crossed*
    I have been pruned by old man river!!!!!

  3. #48
    Junior Member Backyard Mechanic maurice c's Avatar
    Join Date
    Feb 2006
    Location
    Yes we Canberra
    Posts
    208

    Default Re: Securing your number plate

    I went for the tamper proof torx heads from specialty fasteners, they are only about 1.20 each. A guy on my street was watching me put them on and he called them anti cock-smoker bolts, I have no idea why anybody?

  4. #49
    the Afterbirth Tycoon Automotive Encyclopaedia PlacentaJuan's Avatar
    Join Date
    Nov 2005
    Location
    SA
    Posts
    1,139

    Default Re: Securing your number plate

    maybe becuase you smoke the cock like a lollipop?

  5. #50
    Oh What a Feeling! Backyard Mechanic c2888's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    332

    Default Re: Securing your number plate

    http://www.endeavourtools.com.au/onl...rity_fasteners

    way super special bolts, i found them browsing a bearing wholesalers catalogue, i gather that bearing wholesalers can get them.

    Dan
    The spanner in my avatar is actually a 16mm, that's why it's still new

  6. #51
    Forum Member
    Join Date
    Jul 2006
    Location
    ACT
    Posts
    2

    Default Re: Securing your number plate

    Weld them on? Liquid Nails lol

  7. #52
    My Wife says I have Too Much Toyota o_man_ra23's Avatar
    Join Date
    Nov 2005
    Location
    QLD
    Posts
    6,684

    Default Re: Securing your number plate

    out of the ones C2888 has shown, the tri-circ or snake eyes heads would be the hardest to undo without the proper tool, IMHO. a lot of the others can quickly be defeated by flat head with or without hammer.

    Cheers, Owen
    Cheers, Owen
    1977 RA28 with 1JZ-GTE (Was 18R-GTE)
    Lancer EVO Brakes into old Celica/Corolla/Corona
    Doing the things that aren't popular... cause being popular and being good are often distinctly different.

  8. #53
    Toymods Net Nazi Too Much Toyota river's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,061

    Default Re: Securing your number plate

    Hi,

    The thing about number plates is that every car has them - and anyone of them (so long as it's not your own) would perectly suit the needs of a petrol/ATM theif.

    So, you don't really need to have your plates locked-down like Fort Knox. You just need your plates secured enough that a thief would go to the next car rather than waste time trying to get your plates.

    However, let me play the devils advocate on this....... if your plates are hard to remove, a thief may cause some scratching and other damage to your vehicle before they move onto another car. Therefore, there is some merit in not having them secured - after all, they're just number plates - not an expensive sound system etc. Let them take the plates, 'cos you just tell the cops your plates were stolen. Furtheremore, you can always get new plates or the old set remade.

    There, I've effectively argued against myself now!

    seeyuzz
    river
    The thinking man's clown and the drinking woman's sex symbol
    RA25GT - There is no substitute | 18R-G - Toyota's Dependable Masterpiece
    Toymods Car Club Treasurer, assistant Historic Plate Registrar & Forums Admin

  9. #54
    Yay! I'm an Automotive Encyclopaedia Hydra's Avatar
    Join Date
    Oct 2005
    Location
    SA
    Posts
    948

    Default Re: Securing your number plate

    I'd think a couple of torx screws and some loctite on the thread would be plenty

  10. #55
    Domestic Godess, NOT Domestic Engineer clubagreenie's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    698

    Default Re: Securing your number plate

    Tamperproof torx (ones with pin in centre), pin can be broken off with screwdriver and ame driver will unscrew it. TRD screws = 12 point sockets.

    There are specialty security screws available in bizare heads like semi circular fittings, wierd s shapes that wont accept anything but their correct bit. Bits are only sold with the screws. Check with fastener specialists. Generally available in S/steel only.
    Friends

    ed_jza80 has not made any friends yet

  11. #56
    My Wife says I have Too Much Toyota o_man_ra23's Avatar
    Join Date
    Nov 2005
    Location
    QLD
    Posts
    6,684

    Default Re: Securing your number plate

    Quote Originally Posted by clubagreenie
    Tamperproof torx (ones with pin in centre), pin can be broken off with screwdriver and ame driver will unscrew it. TRD screws = 12 point sockets.
    pliers, which are part of every theifs essential toolkit will make quick work of the flashy TRD ones.

    Cheers, Owen
    Cheers, Owen
    1977 RA28 with 1JZ-GTE (Was 18R-GTE)
    Lancer EVO Brakes into old Celica/Corolla/Corona
    Doing the things that aren't popular... cause being popular and being good are often distinctly different.

  12. #57
    Forum Member
    Join Date
    Jul 2006
    Location
    ACT
    Posts
    2

    Default Re: Securing your number plate

    Stolen plates is a pain. A guy at work here has his plates stolen from his car at Canberra Hospital Car Park.

    BUT, the considerate thief replaced them with the ones they had stolen from another vehicle.........

  13. #58
    Domestic Godess, NOT Domestic Engineer clubagreenie's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    698

    Default Re: Securing your number plate

    Begs the question. If you had std plates, would you notice if they'd been switched at all?

    You get pulled over and the cops like wrong plates son and you're like WTF????
    Friends

    ed_jza80 has not made any friends yet

  14. #59
    JZ Powered Too Much Toyota EldarO's Avatar
    Join Date
    Oct 2005
    Location
    Western Aus
    Posts
    5,614

    Default Re: Securing your number plate

    i know my plates, my friends all distinguish my car from other black supras by my plates.

    theres nothing special about them, they're just standard plates.

    so in answer to your question, if approaching my car, i would notice, unless the other plate (from the side of the car that i cant see) was taken, but i would notice very quickly, within a few hours.

    Eldar.O.

Similar Threads

  1. W5X Speedo Drive Comparision (Steel plate vs Alloy plate)
    By wilbo666 in forum Tech and Conversions
    Replies: 43
    Last Post: 12-08-2011, 08:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •