the tang always faces to the frt of the block same with the main caps as well they have arrows that go to the frt ,if you arnt sure always goes to no 1 cylinder direction
Heya,
Just wanting to know which way the rod is assemled to the piston. eg. which side of the crank do the rod tangs belong?
Thanx
the tang always faces to the frt of the block same with the main caps as well they have arrows that go to the frt ,if you arnt sure always goes to no 1 cylinder direction
There are casting bulges on the front face of the rod, and theres a notch in the front of the piston. Not sure which side the bearing tangs belong, but they belong on the same side. Just look to see which side of the rod has more casting on it.
Cheers, Owen
Cheers, Owen
1977 RA28 with 1JZ-GTE (Was 18R-GTE)
Lancer EVO Brakes into old Celica/Corolla/Corona
Doing the things that aren't popular... cause being popular and being good are often distinctly different.
She is sorted,
Looking from the top to the front the oil squirter hole faces the right of the engine.
Thanx for help anyway
Bookmarks