The ke55 had a cable clutch didnt it?
So what are you using in there atm?
gday, i got a couple of questions here. car in question is a ke55 fitted with 4agze.
so anywho, the clutch is rediculously hard to push in so id like to upgrade the slave cylinder from the stocko t50 one. i've heard that a ta22 one can be used, is this bolt in?
any suggestions or oppinions would be appreciated.
Last edited by caibs; 21-05-2007 at 07:10 PM.
uhh sorry i didnt word that very well haha
what else can be used for a t50 ?
Last edited by caibs; 21-05-2007 at 07:10 PM.
You could use one from a Sprinter or AE71.
Brad
Old Corollas never die...
My KE30
Updated 15/7/2007............ yes, I need to pull my finger out.
it depends what side your clutch slave is on.
if its passanger side (ADM bellhousing) then you might be able to use one of a w55/57 gearbox out of an ra65 or something, i doubt ta22 would be better than what you have in there and they are on the drivers side as well.
Originally Posted by river
passenger side my friend
Bookmarks