Ra65 (wont Start)

[hybrid_turbo]

yeah it has got new petty in it now, i'll see what happens tomorrow

[hybrid_turbo]

ok well now i know that the injectors wernt working...

when i put the engine back together there was still some dust in the part where the
injectors sit in the manifold from sanding the gasket off and it wass still there
when we took out the injectors today... but the bad thing is i dont think any of
them worked at all.. i have put my spare injectors in hoping that will fix it but
we think the plugs are way too loose...

[thechuckster]

i seriously doubt all four injectors are dead - given that your vacuum plumbing isn't intact, it's quite possible that your wiring/connectors are not intact either.

95% of wiring issues are actually mechanic in nature, e.g. plugs not connected, bent pins, no fuses, wrong connectors, bad/no earths etc.

retrace your steps (figuratively) checking plugs, continuity and voltage... you need a multimeter to check stuff as well...

[kingmick]

ok well now i know that the injectors wernt working...

when i put the engine back together there was still some dust in the part where the
injectors sit in the manifold from sanding the gasket off and it wass still there
when we took out the injectors today... but the bad thing is i dont think any of
them worked at all.. i have put my spare injectors in hoping that will fix it but
we think the plugs are way too loose...

How did you go? if injectors sit for a length of time and there is any moister inside them they can lock shut, all of them.
Did you spray some fuel in to see if she started to kick? a Good spray of WB40 into the inlet manifold will get it to start to kick.