brake master upgrade for corona???

**sam-131** · 01-08-2006, 10:53 PM

my brakes were a bit foamsih when i changed over the breaks from a celica and now my master is making a mess every were in my bay so yeh what can i upgrade to ? with out to many hassles?

thanks Sam

**Pube** · 02-08-2006, 07:09 PM

I had the same problem with my 142 when I upgraded my brakes. The leak seemed to be coming from that plug on the bottom of the master cylinder. I took the plug out and the fitting and spun up a piece of nylon and jammed it up the hole. It doesnt seem to be leaking anymore! You could just get a new master cylinder or get a rebuild kit?

**kingmick** · 02-08-2006, 07:23 PM

Originally Posted by sam-131

my brakes were a bit foamsih when i changed over the breaks from a celica and now my master is making a mess every were in my bay so yeh what can i upgrade to ? with out to many hassles?

thanks Sam

What celica calipers etc etc, sorry my mind reading is a bit slow at the end of the day.What the hell does foamish{is it a religion?} mean. is it making a mess out the top of the resivour or is it leaking in other places?
There is some very smart people on here, but not even einstein is that smart.

**sam-131** · 02-08-2006, 10:17 PM

foamish : like foam soft like or sponge like or spongie. soft but yet hardish ref to pic

classic corona brake upgrade xa6x calipers and discs

meh i'am no to sure were it is leaking from but yeh i think pube is on the money on that fitting

i replaced old one today from one that was in my parts bin and it to had a lose bottom fitting thingo i just got a spanner and did it up and pumped it full of engine builders magic havent see a leak yet but for some reason my bias is up sh1t creek

also note spilt brake fuild on exhust makes lots of smoke and smells bad