RA60 to 22R

[mullett]

Ok, I've got the RA60, and I've got a 22R. Sure it bolts in, but how does all the wiring interchange? The 22R is complete, pulled from a Corona. Complete, uncut loom, with all the other electronic gizzmos and the ECU. Is it easiest to simply bolt the 22R in, bolt it up to the box, and just feed positive power where it needs it? I'm sure there's gotta be more involved, if anyone can help out, that'd be awesome

Cheers, RM.

[Screamn_Sleeka]

Id be very interested, sorry i cant help, but if u document it ill like u

[mullett]

hahah, no worries mate. If anyone's interested in a point-by-point photo blog of the swap, I can do that while I'm there...if there's that kind of interest...

RM.

[mrshin]

Don't forget the fuel pump/tank;-)

[brett_celicacoupe]

oman_ra23 has done it. he will chime in soon. although i seem to remember somebody has already started a thread about this?

found

http://www.toymods.net/forums/showth...ight=22RE+RA60

[mullett]

hahah, I searched for that thread too Oh well, merry merry. The main thing I have is the wiring gremlins, apart from that it should be pretty straight forward...

RM.

[brett_celicacoupe]

wiring gremlins?? there is only like 2 wires that needs to be connected for the ECU to work

pinouts were in the old toymods repository

[mullett]

so put the whole corona loom in, tape up all the loose ends, connect the ECU, connect a couple of wires, and away we go? FTW!!!!

RM.

[ViPeR_NiPPleX]

should be pretty straight forward, just swap in an ra65 tank with the intank pump ... you might need to punch a hole in the firewall for the loom, i dont think the ra60 has one?