Oil filter adapter plates

[Gleno28]

Hey,

Can't find much in a search,
Just looking at setting up an adapter plate beneath my oil filter to run oil pressure and oil temp gauges from. Similar to an oil cooler set up i guess but just for sensors.

It's for a 1GGZE but apparently the Z418 filter is fairly common, so i'd assume a suitable adapter would be also.

I also heard that a fellow Toymods member makes/sells them too??

Any info/comments would be great
Thanks
Glen.

[psychofox]

You can get them really cheap on ebay with just 1/8NPT threaded sensor ports. You need one with 3/4-16 threads. There's not really much difference with the good and bad ones if they are just a the sandwich plate type.

[mullett]

For what it's worth man, how about getting a remote filter, cooler etc at the same time? You'll never look back...spin on, spin off, drain oil, fill oil

RM.

[Mr Ed]

Hey,

Can't find much in a search,
Just looking at setting up an adapter plate beneath my oil filter to run oil pressure and oil temp gauges from. Similar to an oil cooler set up i guess but just for sensors.

It's for a 1GGZE but apparently the Z418 filter is fairly common, so i'd assume a suitable adapter would be also.

I also heard that a fellow Toymods member makes/sells them too??

Any info/comments would be great
Thanks
Glen.

Z418 is the same as my 2JZ. I learn something everyday.

[ProjectSleeper]

just waiting on my Greddy kit to arrive from the states...

I'll have lots of pics in about 2 weeks when it arrives...

Oil filter relocation kit that has the facility to install two sensors.. I am using it for a DEFI DIN guage set..