Nemoto Mesh wheels now in stock

[BenBenDesu]

We now have stock of the new Nemoto mesh sizes:

15x8 +5 4x100/114.3 $165 each
16x8 +15 4x100/110 $195 each
16x8 +15 4/5x114.3 $195 each
16x9 +0 4x100/110 $195 each
16x9 +0 4/5x114.3 $195 each

The 15x8s are ideally sized for Hachis, the 16x8 is good for MX71 and a staggered set of 16x8 and 16x9 is perfect for MA61.
Of course if you are into stretched tyres and wheels outside the guards then they are all perfect for everything
Find them all here: http://otomoto.shop033.com/b/2218497/1/nemoto.html

[hazkell]

Do the centres/bolts of these come out? Looking good for sure!

[BenBenDesu]

Do the centres/bolts of these come out? Looking good for sure!

They are a one-piece wheel, but the plastic rivets can be pulled out so it's easy to mask them up and repaint the centres.

[BenBenDesu]

We just got new stock of the Nemoto mesh 15x7 +20 so right now all sizes are in stock.
We also got new stock of the Nemoto Borb (Borbet replica) in 15x7 +20 and 15x8 +10 (4x100/114.3):



Another new arrival is the Nemoto Sprint, which is a 15x8 +5, available in either 4x100 or 4x114.3.
This is a very light wheel at only 6.8kg, finished in a light shade of hyperblack with polished rim:



All of the 15-inch Nemoto wheels are just $165 each.
Find them on the Nemoto page

[_gear2]

They are a one-piece wheel, but the plastic rivets can be pulled out so it's easy to mask them up and repaint the centres.

are you able to supply replacement plastic rivets? or know where you are able to get some?

[BenBenDesu]

are you able to supply replacement plastic rivets? or know where you are able to get some?

Gold rivets are here: http://otomoto.com.au/p/7465692/nemo...ld-rivets.html
We can order silver ones in if you need them.

[BenBenDesu]

All Nemoto wheels are on sale now on our website. Use the discount coupon code NEMOTO131212 and you can get 20% off all Nemoto wheels until midnight December 13

[BenBenDesu]

Several new models have just arrived, starting at only $110 a wheel
http://otomoto.shop033.com/c/4425375...to-wheels.html

[BenBenDesu]

Several new models have just arrived, starting at only $110 a wheel
http://otomoto.shop033.com/c/4425375...to-wheels.html

[TurboRA28]

What size/offset would you recommend for a mx73?
Cheers
Joel

[BenBenDesu]

What size/offset would you recommend for a mx73?
Cheers
Joel

16x8 +15 should be suitable

[RyleyMA61]

Would the 16" Meshies fit over 326mm rotors with Z32 calipers?

Thinking they would look fantastic on the MA61...

[thu2921996]

i can't open link. it's error

[trdee]

probably because this thread is 3 years old and the offer is no longer in place...