Activity Stream

Really glad to see your back and the projecti s moving fwd. Mind if I send you a PM? Had some questions about my own project. What is your max MAF...

I moved away for a while, RAV was sitting unreg on a farm. Got it back, cleaned it up, going for rego this week. Took out the Panther ECU, put in...

online search today: From August 1978 - to June 1981 18R-GUEU Replacement Block Part Number: 11401-39247 https://www.monotaro.sg/p/14311755.html...

I only wanted to make sure that you were aware of that issue. also, look around for the 8R engine blocks 11401-39086 is the part number for the 86mm...

That's excellent 73GTV! Glad to hear your interest with these engines has spanned decades. I really hope that my block (actually I have 2 thankfully)...

Hey, Gased Did you ever get any answers?

Carboy magazine November 1981 How to build a 2.4 18RG Page 77! So the advice I share proves a point. You are welcome!

Understood I have given my opinion. May you have a long successful build. I've only been doing my builds since MAY 3RD 1978. (My first engine build...

Hi 73GTV From everything I've read on these particular engines, 92mm bores have been done countless times without bore liners. Lately, I've read...

Just remember that the larger the bore, the thinner the wall and that could become porous. The way 92mm were used in the old days was with cylinder...

Hey guys, thanks for the replies. Even though my 9.7:1 pistons are perfectly useable, I've decided to get some 92mm 10.5:1 pistons from Kameari to...

Never mind, pretty sure ive worked it out. http://www.brdracing.com/2tc_3tc_wiseco_pistons.htm

https://photos.app.goo.gl/FRJfqPvfW5H9cbuC9

Hey, just wondering where i can get some parts for the 3t-gte struggling to find parts. Do i need to do a special order now days i used to...