I would have thought 90363-35007 for the bearing and 33368-20013 for the synchro ring
Transmission came out of an North American 84 Celica Supra.
I just ordered a new input shaft (33301-30070), front input shaft bearing (90363-35038) and synchro ring (33368-30130) as per toyota dealership you have to replace all three parts if you replace the original shaft with this new one.
After pressing on the new bearing on the new shaft there is a significant gap between the bearing and the snap ring see pic. Is there supposed to be a shim behind the bearing or did I just get bad info, am I missing something?
Please help!
https://www.flickr.com/photos/153511...posted-public/
I would have thought 90363-35007 for the bearing and 33368-20013 for the synchro ring
Jealousy is a curse
Bearings are as far as I can tell the same size, only difference are the shields. Both are 6307.
I’m so confused....
Anybody have access to service bulletins, wonder if there is something there?
Thanks
Last edited by corrversion; 10-11-2017 at 02:30 AM.
Bookmarks