OK I did this mod on the weekend. First side took close on 4 hours or torment, second side an hour and a half. So I have a few pointers to add to your instructions. More as a sanity saver than anything else.
After pulling the trim and plastic off, you will see various groups of bolts/nuts.
Mark all bolts as per riceburners advice.
At the most aft (back) part of teh car you will find a group of 3 bolts. These are for the rear rail which actually sits horizontal. Remove this and slide the rear rail off the roller and remove it. It should come out easily and just gets in the way if you don't.
Next aft is 2 bolts down low and a single nut up higher. These are for the stopper and once again, it gets in the way and it is easier to remove it.
Then everything else has to come out in the same assembly. I actually found it a lot easier to totally remove the adjustment screws on the front rail and realign the window afterwards. It is a soul destroying experience to try and get it out otherwise.
Other than that, the mod is great. The windows roll up and down like they should and I am happy as a pig in mud.
Thanks Riceburner. Sensational effort.
Anthony
Bookmarks