Can you identify maker of this LSD ?

**andrewvibert** · 14-12-2006, 08:13 AM

Its from a late AE86 ( large axle) . I dont think it is Cusco, Kaaz , TRD. Are there any other suggestions. The top section looks like the standard TRD LSD side plate.

**strat** · 14-12-2006, 09:02 AM

i think its a trd or genuine toyota. deffinatly not KAZZ looks nothing like mine.

**andrewvibert** · 14-12-2006, 10:04 AM

TRD is like this one so I dont think TRD

**psychofox** · 14-12-2006, 10:21 AM

I have a TRD LSD from a Kouki Axle and it looks like this....

very different as you can see - the centre is cast as a single piece.

The centre you have looks like a standard LSD top and bottom casing (if that makes sense) with a different Clutch pack arrangement. It even has the toyota logo on the crownwheel mounting flange. Maybe someone in Japan has made it better?? TRD LSDs don't have this - they normally say T2 or someting as they are made by Hitachi.

**psychofox** · 14-12-2006, 10:22 AM

Whoops posted while you were saying the same thing....

**SillyCarS** · 14-12-2006, 01:44 PM

in the second pic, that little round symbol on it looks to be toyota, although i havent seen one like it before

craig

**oldcorollas** · 14-12-2006, 01:57 PM

it looks liek this one, 2 pin LSD. made by toyota i think, but not a 2 way action... infact.. maybe it is just preload operated? the 4 pin, 2 way LSD's have smaller holes (with the angle mechanism thing.. (i'm, not good with words today)
perhaps it is a stock LSD for that axle, instead of the TRD aftermarket centre?

http://page11.auctions.yahoo.co.jp/jp/auction/n48665156

**psychofox** · 14-12-2006, 03:20 PM

I think it might be a stock LSD. Have a look at this exploded diagram (courtesy of www.my-acoustic.com) of the stock LSD. Looks very similar.

**c2888** · 14-12-2006, 06:45 PM

I have one of those, definately a toyota one. Mine came out of a euro ae86 GT.

Dan

**andrewvibert** · 15-12-2006, 09:34 AM

Thanks all. Thats the one. It is definatley 2 way.
This diff will be for sale soon in a JDM large bearing ae86 housing with Kouki axles with brakes but in need of fresh brake discs.Ratio will be 4.3.
Price will be $1500