CT26 TUrbo to Manifold Flange size

[JZA70R_92]

hello guys

Need to know the dimentions from bolt hole to bolt hole also size around of flange and side of hole in the middle.

[Supra967]

for 7M? I drilled mine at 70mm and 80mm but was a little tight getting over the studs, but i tried to drill the holes half a mm over stud size.

Edit: I think the hole is just over 50mm

[CHB]

its not in square dimension. if it is CT26A from 7MGTE, it was 70mm X 80mm. the round manifold entry is 60mm. so i just remember it as 60mm-70mm-80mm.. 70mm and 80mm is for the bolt holes...