Spare parts for AE101 4agze

[defcon]

The tension roller for my supercharger belt is making noice. Where can I get a new one? The toyota dealer here in Norway wanted 250 bucks for this.

So are there any cheaper places?

[Adash=P]

Can the bearing be pressed out? If you can get a part number for the pulley, I'll source one locally and if its cheaper, I can send it out to ya.

[defcon]

Sorry the bearing can not be pressed out.
The part number is 13570-16010 , thanks alot mate.

[TERRA Operative]

Apparently you can swap to a silvertop idler pulley, which is rebuildable.
I'm not sure of the specifics of this conversion though, you'll have to have a search around.

[inertia]

I'm using an aftermarket 4ag timing belt tensioner pulley ($35) that I've flipped around so the bracket/spring holder is facing outwards, a different nut with more thread a washer to space it out and a washer on the nut side to center it... been working fine for 1.5 years now . will check it all over soon when I change the drive belts.

[TERRA Operative]

Can you take a photo?

[damo101]

im using the idler pulley off a magna i think it was. i don't think there bearing presses out but they are fairly cheap.

[defcon]

Some pictures! Got something new Adash=P?

[TERRA Operative]

Is that off a stock AE101 GZE? It looks totally different to mine....

[defcon]

Yes, I belive so. Here is a picture:

[mr2gze]

Yes, I belive so. Here is a picture:

FYI that is not a stock crank pulley (looks ~175mm) or idler (stock idler would foul a crank pulley of that size).

cheers

[defcon]

So anybody know what idler i need then? confused

Edit: Looks like it has been modified a bit. Edge on one side is grinded down.

[Adash=P]

Sorry for the late reply. It wasn't much cheaper so its pointless.