Howdy lads,
Anyone know what the part number is for the rear seal where the tail shaft goes into for the JZA70 R154 box?
Will need it by the end of today.
Any help much appreciated.
Cheers,
Heng
-Sleeper 2J + R154 X83
-GQ 93 Mav, 4.2 Diesel, 35" BFG KM2's, 4" lift, 3" Exhaust, Front Locked, Rear shimmed, Sliders, IPF foggies, UHF, 2871R and Intercooled.
NOK BH2501E -->
Rubber OD, Double Lip Oil Seal with Helix
ID=40.00, OD=58.00, W=11.00mm, Material=Acrylic Rubber ACM (T599)
(You can use this information to go to a seal shop and get an affordable replacement)
or...
Toyota: 90311-40001
As a note, I use this website to xref from the NOK part number to seal dims...
http://www.simritna.com/
Cheers
Wilbo
Last edited by wilbo666; 30-07-2008 at 02:24 PM. Reason: Added seal dims
Thanks alot Wilbo.
Much appreciate + rep for ya![]()
-Sleeper 2J + R154 X83
-GQ 93 Mav, 4.2 Diesel, 35" BFG KM2's, 4" lift, 3" Exhaust, Front Locked, Rear shimmed, Sliders, IPF foggies, UHF, 2871R and Intercooled.
You must spread some Reputation around before giving it to wilbo666 again.
-Sleeper 2J + R154 X83
-GQ 93 Mav, 4.2 Diesel, 35" BFG KM2's, 4" lift, 3" Exhaust, Front Locked, Rear shimmed, Sliders, IPF foggies, UHF, 2871R and Intercooled.
FYI without going directly to a seal shop you will need to get a 'genuine' one (~$22).
No aftermarket manufacturer lists it in their books.
For some reason they all list the same seal as the W58 and A43DE, which is obviously smaller.
(went through this a couple of months back).