how do I remove these?

[J0RD0]

How do I remove the knob's on the fan control on my RA23 without damaging them do I need a special tool? any help would be appreciated

[Celica RA45]

you can either pull them off or there might be a small screw under them ,so you will need a phillips screw driver

[Supra-Jim]

I am pretty sure they are just a press fit over the stalk. You should be able to pull them and they will slide off. I have had other cars that worked this way. Though someone who's pulled apart a Celica should really confirm it.

hope this helps.

[LeeRoy]

Just pull on them.

[J0RD0]

yeah the previous car i pulled on them and they never went back on, well not with the help of super glue anyways. Didnt think to look for scew's underneath, will have a look now

[oldcorollas]

NOOOOOOOOOOOOOOOOOO


DO NOT pull on them.. without checking for the small screw underneath.....

otherwise they be fucked real bad and you'll need new ones...

[stradlater]

ALL the ra23 ones I've ever seen (and I've seen too many to want to remember) were all Pull type.

[twentyEight]

No Screws, just an annoying little clip...

Just pull them off, they can be a real bitch sometimes, but make sure you don't loos the little clip that sits inside of them otherwise, even with the use of superglue, they wont go back on...

[Lachie]

They were definately the push on type on my '23, you have to pull f*****n hard sometimes though

[LeeRoy]

Another vote from me for them not having any screws

[The Witzl]

Definitely no screws... they might be tight, so add some Inox if they are.

[lojik]

I may be wrong, but...
They look like the ones on my ma61, the metal you see running around them is part of a spring and ball arrangement that holds them on.
They just pulled off, but I imagine if the ball became lost they wouldn't go back on too easy.

[J0RD0]

thanks guys, all sorted