sc12 supercharger help

[dj_brophy]

ive got an sc12 supercharger on the cheep, fitting it to a different car

how the hell do i get the cluch off?
ive used a rattle gun and taken off the nut off the end.but i cant see how the pully/clutch arrangement cumms off... i have a new cluch to go into it.
also want to open the unit to clean it as it is full of oil from previous owner.

and one know of any pics of how to do this or done this before?

thanks
daniel

[feral4mr2]

i'm sure last time i plulled one aff the s/c once i had undone the end nut, pulled that bit off there was a large circlip and then an internal nut that i used a pair of longnose pliers to undo. (end of pliers into the grooves in the nut). it was years ago though.

i'm sure you will find a pic or diagram on this forum or the old toymods forums.

[TooF]

yup thats pretty much it. rattle gun off the 14mm nut visible form the outside. then there is the big notched nut feral mentioned.. if you cant get pliers onto it i put a screw driver in onof the notches nd just have it a tap with a mallet and it come off no stress.

then the circlip is under that and is holding the electromagnet on.