What rims clear hilux calipers?

[sir_drift_alot]

Last night i installed the pug/cor/hilux brake upgrade into my ra28. My jellybeans fit over them but dont have enough clearance in the centre and hit . I have 8mm slip on spacers fitted atm, (which clear by a bees dick) but im taking it to the engineer on monday and need some cheap ass rims to fit, so im just wanting to know what everyone else uses?

[The Real Roadrunner]

i think ma61 rims fit. check the CHP thread someone would have put up which do/dont fit

[DQIKST]

i think some 14s just fit, you will need 15s mate,

[IN 05 NT]

factory 14's fit i think,

i KNOW rt142 corona 14" steely rims fit, as thats what mine is roling around on,

[Pube]

factory 14's fit i think,

i KNOW rt142 corona 14" steely rims fit, as thats what mine is roling around on,

Corona avante rims or black steelies??

[IN 05 NT]

the steelys, not the alloys,

[twentyEight]

14" Hotwires will fit, so I've been told on several occasions...

[takai]

14" Hotwires
14" MA61
14" SSR Mesh
14" SSR Mesh Copies
15" Superlights
15" Buddy Club P1s (with huge spacers)
16" Nonames
14" Advans
14" Jellybeans in +2 offset

Thats what i have had on there sofar.

[ra23celica]

The 14 inch original steelies on my RA23 would just catch in two places on the top of the Hilux calipers. 2 seconds work with a 4 inch angle grinder and all fixed.
14 x 7 MA61 fit.
15 x 6 MZ20 Soarer rims also fit.

[Pube]

just trial fitted my RT142 Avante standard rims (aussie spec) and they nearly fit. They are ok around the caliper but foul on the spokes only just. A 5mm spacer will do the trick

[DQIKST]

can some one post a pic of a avante, need to see what they look like need the handbrake cable set up out of it

[sir_drift_alot]

thanks guys. il give the rona steelies a crack on the w.e

[joecoolmk2]

i've had 14X7" challengers/globes over them on my old RT132 corona.