quick Q's on some 20v wiring

[DeftAnesthetik]

actually managed to get some time off so i have been hittin the beast hard in order to complete this transplant. I have eliminated all the wiring i know i will not need but have a few here that i am unsure about. thinking most go to body harness but need some reasurance before i go chop-chop.

heres a preview of my complete mess



im sure anyone trying to wire one of these in has been here before. but here is the pics with my questions.

first off the VVT wires came loose in shipping, which way do they go?



secondly i have these four plugs, are they just for my body harness(lights, brakes, etc)?
i am not running any power steering nor am i running any A/C. what if any of these do i need?





third is this big'un. I have seen reference to it before but only to where it goes (alt,starter relay, am1 fuse) but where does it come from?


and lastly is this wire on the ignitor, leads to connector on the second plugh pictured above. where does this need to be, if anywhere? (its the 2nd connector from the right, with locking tab up)


any and all info is already greatly appreciated

[BeRad]

http://www.turbocorolla.com/tech/ima...op_diagram.jpg
wiring diagrams are your friend. shows you what plugs are for what even though its in japanese or something, relative pieces have been translated.

power steering wont use any of the wires.
a/c will use a solenoid.

[spoon]

http://home.clear.net.nz/pages/phil....Pin%20Outs.htm

this is where i got all my stuff from, from memory, the big plugs you dont need, cant remember the 2 little ones and the squarish one dont need. igniter has 1 output to coil, 12v power, ground, input from computer and i think tacho output - ill check later for you

[psychofox]

vvt solenoid the wire order doesn't matter, its just an on/off solenoid. one is +12V and the other is back to the computer to switch the ground.