HSD universal camber kits

[dori dori]

Hi Guys, our new HSD universdal camber top kits are now ready for sale so here is the blurb and supporting images.


Designed for use with our HSD Coilover sleeve kits, these universal pillow-ball camber-adjustable top mounts can be modified to suit most cars with strut type suspension.


The lug holes are not drilled so you can position the supplied studs to suit your vehicle with both 10mm and 12mm studs supplied with each kit.


A pair of special spacers (to suit our sleeve kits) and M14x1.5mm top nuts are also included.

Each kit consists of:
2 x pillow-ball camber adjustable top mounts
2 x special spacers
2 x M14x1.5 nuts
6 x 10mm studs
6 x 12mm studs

Cost is for each kit will be $299.00 per pair and they are in stock now.

It might be best to point out hat this is not for everyone but as most Toymods members are hands on you should be right.


Here is the complete kit


And this shot shows what it will look like with one of our sleeve kits (which are sold separately)


Cheers

[RA35GT]

Dood, your going to make me poor.

[Duk]

Diameter of the large mounting plate?

[dori dori]

Dood, your going to make me poor.

Rudi, thats the plan. The poorer you are the richer i am. See how it works

Cheers

[Cuzzo]

Good to see these are completed. Any discounts for testing or repping?

[dori dori]

Diameter of the large mounting plate?

Its 155mm in Diameter.

Cheers

[dori dori]

Good to see these are completed. Any discounts for testing or repping?

hey Cuzzo, in short no.

Cheers

[TheToyman75]

Nice work as always Grant !

[Steve M]

That looks like a fantastic product.

I think I will have to start saving.

[dori dori]

hi guys, i just thought i'd post up the finished result of a HSD sleeve kit conversion to a Datsun 240K we have in the shop. This is for one of our cars. As you can see it also uses one of our HSD Universal camber top kits.

Big ups as always for Linden for the quality fab work.

Cheers,