KKR Aluminium bends

[dori dori]

Hi Guys, i've got some more products i think you will like.

Offical Release

New to Otomoto Pty Ltd are these chromed aluminium mandrel bends. Ideal for use in intercooler kits and mounting pod air filters, they are available in both 2.5in (63mm) and 3in (76mm) diameters and are constructed from mandrel bends, all featuring ribbed ends.

They are also thick enough to be easily cut and welded as needed.

There are four types of aluminium pipe available with the straight sections retailing for $20.00, 45 and 90-degree bends retailing for $25.00 and the 180-degree bend retails for $30.00. Both diameters are the same price.

[Ben Wilson]

Chromed aluminium???

Polished perhaps?

[dori dori]

No, chromed. I'm told the process is much like anodising.

[Ben Wilson]

Then welding them would probably be a really nasty proposition..

TIGs don't like coated materiel in my experience.

[dori dori]

True, but it can be done and rechromed.

Available soon (mid February) will be raw aluminium finish so the bends can be cut and welded then polished.

Cheers

[CrUZida]

Whats the overall width of the 180deg bend?

I've yet to measure the one on my car, but its not tight enough and fouls.

[The Real Roadrunner]

Available soon (mid February) will be raw aluminium finish so the bends can be cut and welded then polished.

2" and 2.75" also? come on then my life would be easy.

you can take the coating off with a linisher and weld it as i have done it many times b4 but it does take some getting use to as the impurities come through whilst welding.

let me know when the raw stuff comes in and ill be there in a flash.

cheers
linden

[dori dori]

Whats the overall width of the 180deg bend?

I've yet to measure the one on my car, but its not tight enough and fouls.

The overall width of the 63mm 180degree bend is 280mm.

The overall width of the 76mm 180degree bend is 310mm.

Cheers

[dori dori]

2" and 2.75" also? come on then my life would be easy.

let me know when the raw stuff comes in and ill be there in a flash.

cheers
linden

Hi Linden, i will see what i can do on the 2in but i'm not so sure on the 2.75in. not sure how much demand we will have for it.

Cheers

[Hash_ra23]

i may also be interested in a couple 2inch 90degree chromed bends..but would want them within the month....

[The Real Roadrunner]

Hi Linden, i will see what i can do on the 2in but i'm not so sure on the 2.75in. not sure how much demand we will have for it.

Cheers

2.75" is most toyota and nissan TB size, demand would be pretty high if you were to put kits together for you coolers to suit a variety of cars.
2" is the majority of t25 size turbos so should be plenty of uses for them also

see what you can do and let me know.

cheers
linden

[dori dori]

Hi Linden, will do.

[CrUZida]

The overall width of the 63mm 180degree bend is 280mm.

Damn, same as whats on the car.

[dori dori]

No drama.

Cheers

[Rallystanza]

Yer 70mm would be awesome!!

None of this polish stuff to be had.

[J0RD0]

Need me a 3" 45degree bend if you have one on the shelf?

[dori dori]

Need me a 3" 45degree bend if you have one on the shelf?

Hi Jordan, we have those in stock.

Cheers

[soru]

do you have any 2" 45degree bend and 2" straight pipes?

[dori dori]

do you have any 2" 45degree bend and 2" straight pipes?

Yes, all in stock.

Cheers

[dori dori]

Hi guys,

we now have stock of the polished alloy bends and straights.

Cheers

Grant