AE,KE rads

[RiceburnaGTV]

Hey guys I have organised some rads to suit KE70's and also AE86's with the next batch.

52mm thick twin core
Core Height: 310mm
Core width: 560mm
Total height: 410mm 440mm with filler neck
40mm mounting wings either side
20mm wings at rear

Outlets to suit any engine configuration can be sorted.

$550 plus shipping

AVAILABLE NOW

cheers
Nathan
JAR

[RiceburnaGTV]

The 86 ones have to go! $400 shipping is free! $30 fee will apply for tassie and WA.

Cheers
Nath

[RiceburnaGTV]

bump farken

[TEH-16V]

pm sent

hope im not too late.

[RiceburnaGTV]

customers car!


brilliant

[boshy]

What sort of rads do you have to suit 1UZ into hilux 2wd with inlet & outlet on top????

[RiceburnaGTV]

What sort of rads do you have to suit 1UZ into hilux 2wd with inlet & outlet on top????

I havent done any with that configuration mate,I have been asked a couple of times but I think your better off using the original confid from Toyota top right bottom left.

cheers
Nath

[love ke70]

how many of these do u have left?
i think we have talked about this before, what sort of power do u think these will cool?
ive got a 50mm thick, 430x670 but im not convinced its gonna fit in a 70
used to have trouble keeping it cold with an old copper rad and the front mount in front. took some work but i got it to stabilise, think that rad was about halfway between my new one and a standard one.

can you provide the rad with the core and tanks, but without the inlet and outlet fitted, so we can fit it where we need it, coz i dont have an engine in a car at the moment...

and how much?

cheers, andy

[The Real Roadrunner]

I havent done any with that configuration mate,I have been asked a couple of times but I think your better off using the original confid from Toyota top right bottom left.

cheers
Nath

It should be the same one thats in Blakes celica, I fitted the same one to my Hilux and the only mod i made was to put a 90* on the top tank due to space constraints, the 1uz should have abit more room in that area though.

cheers
linden

[RiceburnaGTV]

It should be the same one thats in Blakes celica, I fitted the same one to my Hilux and the only mod i made was to put a 90* on the top tank due to space constraints, the 1uz should have abit more room in that area though.

cheers
linden

Yeah thats how we usually do them but I have had a heap of people ask me to put the inlet/outlets both on the top tank

Andy I can supply you with the rad without outlets on it. The only problems I have had with any of my rads is Cuzzos 4a and shanes 4a getting hot doing burnouts and slow speed high rev situations like skid pans etc,which im pretty sure can be attributed to the outlets being on the same side and the coolant taking the quickest road out of the radiator. If you end up needing them inline with each other we can make you one with an internal cross over pipe instead.

I have some cores coming over in 5 weeks and can tack on one to suit the KE if you like,without outlets your looking at $450 plus shipping.

cheers
Nath

[love ke70]

ill have a chat to my useless lazy mechanic and see what he thinks, whether to cut the front out and fit the big bastard, or if we will fit this rad with the motor in, im worried about it sitting too close to the front, as it does step forward a little bit.

ill try remember to get back to you, if you dont hear from me and your looking at finalising the order just harass me and ill let you know.
cheers, andy

[pope]

These still available???

Keen on one for my KE70 with a 3tc.

So top outlet would be drivers side while bottom being passengers side.

Would need shipping to 7050 TAS.

[matty12]

Yeah thats how we usually do them but I have had a heap of people ask me to put the inlet/outlets both on the top tank


cheers
Nath

Just put a baffle in the middle of the tank between the fittings,usually with a small hole to allow air to purge between the to sides.Just like a vl 6cyl as it a factory 2 pass/fitting on the same end.

[Andy 86]

Are any of these still available?

could you do them with the outlets on opposite sides to what they are now, to suit a beams 3sge?

[RiceburnaGTV]

Are any of these still available?

could you do them with the outlets on opposite sides to what they are now, to suit a beams 3sge?

Not until the new year mate and yeah i can put the outlets on to suit wherever you need.

cheers
Nath

[20vturbo]

HI Nath,

Looking for a rad for a AE82, I been told that the ae90 - ae92 will fit in as well as long as the top outlet in somwere in the middle for i have a 20v engine.
Let me know if your able to supply...?

[RiceburnaGTV]

I can get the ASI ones and modify them. I wont be doing any more new rads for the moment until after my next order sells

[20vturbo]

I can get the ASI ones and modify them. I wont be doing any more new rads for the moment until after my next order sells

Ok thanks when you do Id be very interested in getting one!!!

[sundee86]

hey mate - got any ke or ae rads?
doing a BT20v in a ke.

cheers

[sundee86]

hey mate any new ? got them in stock?