3S-GTE flywheels & clutches sw20 gt4 etc

**Wildsupra** · 03-07-2006, 05:33 PM

I've got a 165 Celica GT4 engine that i have put in my mr2, I have used a SW20 LSD gearbox, but my problem is that my clutch wont fit, because the friction plate spline is to small for the SW20 LSD input shaft.

Does any1 know if a SW20 flywheel will bolt to a 165 GT4 3S-GTE?
Or if the inner and outer diameters of the clutch friction plate for the 165 and SW20 clutches are the same? if they are i could just buy a friction plate to suit an SW20 and use it with my Exedy HD clutch that i already have.

Any info greatly appreciated

Cheers
Matty

**StuC** · 03-07-2006, 07:06 PM

165 has 20 spline hub and 185/205/sw20 have 21 spline. Resplining will cost about 200 bucks!the flywheel is also bigger on the later models and has an 8 bolt not 6 bolt pattern. I have a 185 clutch disc here with a couple of thousand kms on it if u want. I cant use it because of the spline issue. Is an extreme HD item, apparently quite a good one too.