Results 1 to 5 of 5

Thread: Alternatives to MS123 hubs

  1. #1
    Car Butcher Carport Converter WDE_BDY's Avatar
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    1,879

    Default Alternatives to MS123 hubs

    Following on from my successful "Are MS65 and MS75 hubs the same?" I though I would try my luck on the rear 5 stud conversion.
    Given that I'm in NZ, are there other jap spec models that also run the appropriate 5 stud hubs, possibly a GS12X equivalent or something like that? I have a few different people looking for me and confirmation on this would be a great help.

    Callum

    PS - thanks to the previous threadI acquired a set of MS75 hubs, then found a set of MS65 as well.

  2. #2
    Junior Member Domestic Engineer Viper's Avatar
    Join Date
    Oct 2005
    Location
    Vic
    Posts
    620

    Default Re: Alternatives to MS123 hubs

    Nissan Z31T hubs are rumoured to fit.
    I have a set, but yet to rip the arse end out of my car and see how they go.

    Other then that, Mitsu. Starion rears might fit too.

    But other then the MS123, no other rears have been proven to fit.
    Daily: '06 Liberty 3.0R specB
    Project Car : '84 MA61: 2JZ-GTE + 6 Speed

  3. #3
    Toymods Pimp Chief Engine Builder Norbie's Avatar
    Join Date
    Aug 2005
    Location
    QLD
    Posts
    3,806

    Default Re: Alternatives to MS123 hubs

    Quote Originally Posted by WDE_BDY
    Given that I'm in NZ, are there other jap spec models that also run the appropriate 5 stud hubs, possibly a GS12X equivalent or something like that?
    I would imagine that GS12x would have the same basic running gear as MS123, being the same chassis and all. Very good chance the hubs are the same.

  4. #4
    Car Butcher Carport Converter WDE_BDY's Avatar
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    1,879

    Default Re: Alternatives to MS123 hubs

    Yeah Norbie, thats what I assumed but was hoping someone could confirm for me. Don't want to buy GS12X hubs to find they don't fit. May have to try getting my EPC running on the new computer to see if the part numbers match.

    Callum

  5. #5
    Car Butcher Carport Converter WDE_BDY's Avatar
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    1,879

    Default Re: Alternatives to MS123 hubs

    According to my Toyota source, the hub part number is shared between GS121, MS121, MS123 and MS125 for Jap and NZ spec. Hopefully that helps someone else out.

    Callum

Similar Threads

  1. MS123 5 stud conversion tips!
    By wilbo666 in forum Tech and Conversions
    Replies: 1
    Last Post: 23-04-2006, 09:14 PM
  2. MS65 hubs vs MS75 hubs
    By WDE_BDY in forum Tech and Conversions
    Replies: 7
    Last Post: 15-04-2006, 01:00 AM
  3. MA61 - 5 stud bearings used?
    By ZZT231 in forum Tech and Conversions
    Replies: 7
    Last Post: 31-03-2006, 12:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •