Hi all, I just did a front brake upgrade to my NCP91 Yaris, and thought I’d share it here.
Stock Australian Yarises have a 255mm rotor on the front, however there are 275mm rotors listed for overseas models (such as the JDM RS, and the Euro 1.8 litre), which are easy to order in here.
Using a pair of ZRE152 Corolla front callipers the 275mm rotor fits perfectly. The callipers bolt up using the original brake hose too, and the dust plate doesn’t even need modifications.
Brake feel is a little soft but still within the parameters of normal. Once I work out an elegant but inexpensive solution for rear discs, I’ll see if a Corolla master cylinder will fit too.
I believe 130 series Yarises run the same brakes as a 90 series, and I also believe that ZRE182 callipers are the same as the ZRE152 ones I used.
Hope this helps others; it’s always nice when there’s a bolt on upgrade using factory parts!