adam,
not many parts can be retrofitted into the 86. here is what i know will fit:
engine (of course)
seats
steering wheel
wheel nuts?
lots of bolts?
T
Hi
I have an AW11 mr2 which is getting wrecked and there are some parts that look like they would fit onto my Sprinter....
First of all since the aw11 has 4 wheel disks would the proportioning valve make the T series disk rear end on my car work as the jdm factory ones do?
I cant think what else looked like it would fit but if someone on here can give me some idea in what i can change over it would be much appreciated
thanx
Adam
Yello and black AE86 J-blood obesity kit - Built 4AGE
Blue X70 Cresta 1GGte
adam,
not many parts can be retrofitted into the 86. here is what i know will fit:
engine (of course)
seats
steering wheel
wheel nuts?
lots of bolts?
T
steering rack
David
Cusco camber tops available for all early mac strut
a few interior bits would fit... gear knob is one off the top of my head
it's quite hard in terms of combatibility, because the AW11 is quite unique.. so body wise nothing is swappable.. engine would go into the sprinter.. the Gearbox could go into a FWD rolla if i'm not mistaken.
well strip the car down and then sell them.. if people are interested they'd know what fits and what doesn't
Research has shown child in front seat causes accidents, accident in back seat causes child
The mr2 has a lot more in common with a FWD Corolla than an AE86.
Yes the MR2 is Just a bit slower and dosnt handle as well, but some of the same parts! hahahahahahahahahahOriginally Posted by Ben Wilson
JK
My mate has the headlight knob/lever on his Levin
Tyres are same size total diametre.
Fuel pump
maybe side skirts???
i'm out of ideas
the prop valve probably has a way different bias seeing as there's not much weight over the front wheels in a aw11
Dan
The spanner in my avatar is actually a 16mm, that's why it's still new
Not sure - AW11s lock fronts really easily...Originally Posted by c2888
Bookmarks