Results 1 to 4 of 4

Thread: T Séries diff

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Oct 2016
    Location
    Vic
    Posts
    6

    Default T Séries diff

    Hi Guys I the diff in my RA60 is making some unpleasant noise so time for a replacement. Any suggestions on where I can track one down. I’m guessing a visit to the wreckers will be the go. What models did the series the T series go in?
    Cheers Andrew

  2. #2
    Forum Member 1st year Apprentice
    Join Date
    Dec 2015
    Location
    Michigan
    Posts
    32

    Default Re: T Séries diff

    Andrew
    The AE86 had a "T" axle, but it would probably be just as difficult to find one in good shape. You may want to consider rebuilding the current diff. Are you sure it not just a axle shaft bearing?
    Davew7

  3. #3
    Junior Member Grease Monkey
    Join Date
    Nov 2006
    Location
    ACT
    Posts
    81

    Default Re: T Séries diff

    RA23 and 28 have the T series as well
    Yes the old Celica's are great cars thanks..

    76 RA23 18RG
    85 GSXR 750 05 GSXR 750 77 RD400



  4. #4
    Junior Member Backyard Mechanic
    Join Date
    Aug 2009
    Location
    NSW
    Posts
    402

    Default Re: T Séries diff

    I'm with davew7, rebuild what you have. If not, after researching part lists, you can look for post 8/83 AE86 centre. Before that time T series used a smaller axle spline, where they slide into planetary gears in diff centre. Also as mentioned check axle bearings, they can make horrid noises.
    Cheers.

Similar Threads

  1. JZX110 F-series Ringgear and pinion into MA61 F-series diff
    By RyleyMA61 in forum Tech and Conversions
    Replies: 0
    Last Post: 26-06-2014, 03:43 PM
  2. diff center upgrades for G series diff...
    By JZA70 R in forum Tech and Conversions
    Replies: 3
    Last Post: 29-10-2008, 12:22 PM
  3. F series Diff flange the same as E series?
    By wilbo666 in forum Tech and Conversions
    Replies: 9
    Last Post: 24-02-2008, 09:24 AM
  4. sticking a G series irs in place of an f series irs diff
    By pete05 in forum Tech and Conversions
    Replies: 10
    Last Post: 23-01-2008, 05:07 PM
  5. G series diff flange on F series diff?
    By antag in forum Tech and Conversions
    Replies: 16
    Last Post: 14-12-2007, 02:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •