Hi Toymods,

Picked up a GA70 with a no start,
I changed the timing belt but I’m only getting backfire and smoke out of the exhaust, no start, it sounds close though.
I lost the position of the dizzy, I noticed the firing order was not what it was supposed to be, so I fixed it going clockwise, still no start. Oddly the firing order numbered on the dizzy cap isn’t what it’s supposed to be either.
Should I be lining up the big rotor button or the small one to piston/contact #1?
I redid the timing belt incase I made a mistake there but still nothing..
lined the notch on the harmonic balance to the 0 on the lower timing belt cover, and the 2 cams dots are lined up.
Please help.

Thanks!!