Results 1 to 3 of 3

Thread: 1uz to t56

  1. #1
    Forum Member
    Join Date
    Dec 2017
    Location
    wiltshire
    Posts
    2

    Default 1uz to t56

    I have a 1uzfe turbo that currently has an r154 box that needs to be mapped and set up. Rather than risk putting it on the dyno and possibly destroying the box i was looking to get a stronger one. From what i can see the T56 Magnum is possibly one of the strongest out there. So Im looking for a CAD drawing of the 1uz to T56 adapter plate. I know they were out there on V-eight.com but that site has closed.

    So has anyone got any CAD drawing of either ;
    a) The 1uz to T56 adapter plate
    b) The 1uz bellhousing (gearbox end)
    c) The T56
    If i can get any of these a can get one machined up.


    Thanks

  2. #2
    Junior Member Grease Monkey
    Join Date
    Apr 2011
    Location
    Western Australia
    Posts
    164

  3. #3
    Forum Member
    Join Date
    Dec 2017
    Location
    wiltshire
    Posts
    2

    Default Re: 1uz to t56

    Thanks for that. I have looked at their adapter plate but I need a slightly different design, where I can mount my How release bearing.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •