BEAMS Blacktop aftermarket pistons?

[o_man_ra23]

G'day all,

Just found out that there is an issue with one of the bores in one of my BEAMS motors. So far there are only a few options I have found for aftermarket high compression pistons. TODA seems to be the leader here, but only offers 12.6:1 +1mm pistons in oversize high compression form. As I'll be running E85 in a race motor, I was thinking even higher compression would be good, and if I can get +0.5mm oversize, that would be handy and give me room to rebore again if necessary later.

Does anyone know of pistons that might fit that bill?

[trdee]

ask glenn (celica RA45)

[o_man_ra23]

Need to be able to tag people like on friendface...

Fortunately the 'unknown condition suspect spare' motor turns smoothly by hand and seems to have good compression.

[Celica RA45]

im on face book i do 14.5 to 1 but with a longer rod and they will be 86.5 bore

[o_man_ra23]

86.5 bore fits in the 2% rule so is good. Whats the damage on a set of pistons and rods? What cam specs do you recommend with them?

[Celica RA45]

give me a ring 0412 045 467 glenn