Results 1 to 11 of 11

Thread: MX83 Cressida Gearbox Problems

  1. #1
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default MX83 Cressida Gearbox Problems

    Hi all,

    Been driving around in my MX83 cressida for sometime now, but since the day I got it once in a while it will not go into 2nd gear (auto box of course) and then snap straight into 3rd and makes a big clunk sound like if one were to drop the clutch in a manual car.

    I was told by a few mates that my gearbox oil was low, but when I checked the levels are all good.

    Even when I use the auto shifter to choose 2nd, its just rides on 1st gear.

    Any help would be appreciated, I've used the search button but seems like this problem is a first..

    Cheers,
    Johnny

  2. #2
    Carless Grease Monkey
    Join Date
    Nov 2005
    Location
    VIc
    Posts
    180

    Default Re: MX83 Cressida Gearbox Problems

    Hi, I think your solinoid for second gear is fried, try to check that thing first. If all the other gears are working fine than I will replace the solinoid first.

    If the km on this gear box are over 280K than I will suggest to either replace the box, or rebuild it. As second gear is the usually the first one to show sign of wear and tear.

  3. #3
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: MX83 Cressida Gearbox Problems

    Yeah, 2nd gear solenoid i think. Infact just replace all the solenoids. Mine does similar only it doesnt change with low pressure, so it requires heat and revs....
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  4. #4
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default Re: MX83 Cressida Gearbox Problems

    I'm quite a noob to automatic boxes, but would replacing the solenoid require me to drop the box?

    I was under the impression that either the kick down cable was stuffed or the gearbox computer was stuff (that's if cressida's have them).

    I'll try to replace the 2nd gear solenoid next week see how that goes.

  5. #5
    Carless Grease Monkey
    Join Date
    Nov 2005
    Location
    VIc
    Posts
    180

    Default Re: MX83 Cressida Gearbox Problems

    you can check it from gearbox computer. TSRM for supra is available online. The method is describes there. Basically you might see the OD light flashing, if you connect the T! and E1 pin.

  6. #6
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default Re: MX83 Cressida Gearbox Problems

    does this help?

    once in a while my O/D light goes on.. I was told that is your diagnostic light...

  7. #7
    Carless Grease Monkey
    Join Date
    Nov 2005
    Location
    VIc
    Posts
    180

    Default Re: MX83 Cressida Gearbox Problems

    your computer will than give you some sort of error code for your gearbox. And it will possibly tell you to change your solenoid. On toyotacressida.net a good discription of changing the solinoid is posted by RIbfeast (he is also a member here )

  8. #8
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default Re: MX83 Cressida Gearbox Problems

    thanks alot, I tried to search for it but I couldn't find it.. I'll try again.

  9. #9
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default Re: MX83 Cressida Gearbox Problems

    ok I kind have got an idea of how to change the solenoid..

    but 1 question? which one is the 2nd gear solenoid.. I'm assuming its the one in the middle.

    Also one more question, do I have to remove everything? or just the sump & filter is enough to reach the solenoid.. I've never done this before.. so I'm going to spend a weekend on it.

    didn't find much on the cressida forum...

  10. #10
    Carless Grease Monkey
    Join Date
    Nov 2005
    Location
    VIc
    Posts
    180

    Default Re: MX83 Cressida Gearbox Problems

    have you looked at Online TSRM for A340E for supra? It should be explained there

  11. #11
    Junior Member 1st year Apprentice
    Join Date
    Jun 2006
    Location
    NSW
    Posts
    10

    Default Re: MX83 Cressida Gearbox Problems

    Yes I have, but its kinda vague on how to replace the solenoid, I have an idea of how to change it and I believe that the 2nd gear solenoid is the one by itself as its marked as no.2 on TRSM Online.

    I'm going to try this out next weekend after my exam at uni and see how I go, if I'm successful I might as well make a guide on how to change it.

Similar Threads

  1. Verifying a w58 gearbox
    By dave368 in forum Tech and Conversions
    Replies: 37
    Last Post: 09-10-2008, 11:39 PM
  2. 5M-E Auto gearbox problems
    By mic* in forum Tech and Conversions
    Replies: 19
    Last Post: 09-03-2006, 10:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •