the odds are they are the same - undo the pinion nuts on both diffs & count the splines & take an o/d measurement - that will tell you
Hi guys
I've got my hand on a KUN26 rear 3.58 LSD diff. Im putting it in my hilux with a g series diff but have a bit of a problem
The bolt patterns are different on the flanges G-series 60mm square, KUN26 one is 65mm square.
And i cant swap out the yokes either as the bearings are different sizes.
Basically does anyone know if the flanges on the diff head itself are interchangeable??
Don't really want to have to chop up the two drive shafts at this point
the odds are they are the same - undo the pinion nuts on both diffs & count the splines & take an o/d measurement - that will tell you
What gearbox are you using?
might be easier to find a tailshaft that has the right diff flange you want that matches the spline count on your gearbox output shaft.
Bookmarks