Results 1 to 3 of 3

Thread: Diff flange problems G and A Series

  1. #1
    Forum Member
    Join Date
    Oct 2013
    Location
    Waikato
    Posts
    1

    Default Diff flange problems G and A Series

    Hi guys

    I've got my hand on a KUN26 rear 3.58 LSD diff. Im putting it in my hilux with a g series diff but have a bit of a problem

    The bolt patterns are different on the flanges G-series 60mm square, KUN26 one is 65mm square.

    And i cant swap out the yokes either as the bearings are different sizes.

    Basically does anyone know if the flanges on the diff head itself are interchangeable??

    Don't really want to have to chop up the two drive shafts at this point

  2. #2
    Twisted ****** Backyard Mechanic .T.'s Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    210

    Default Re: Diff flange problems G and A Series

    the odds are they are the same - undo the pinion nuts on both diffs & count the splines & take an o/d measurement - that will tell you

  3. #3
    corollamanic Backyard Mechanic
    Join Date
    May 2006
    Location
    VIC
    Posts
    292

    Default Re: Diff flange problems G and A Series

    What gearbox are you using?

    might be easier to find a tailshaft that has the right diff flange you want that matches the spline count on your gearbox output shaft.

Similar Threads

  1. A-Series diff w/ wrong flange PCD - Swap tail-shaft or flange?
    By AndyTTR in forum Tech and Conversions
    Replies: 6
    Last Post: 13-07-2011, 11:09 AM
  2. g series diff flange
    By stradlater in forum Tech and Conversions
    Replies: 21
    Last Post: 22-11-2008, 11:18 AM
  3. F series Diff flange the same as E series?
    By wilbo666 in forum Tech and Conversions
    Replies: 9
    Last Post: 24-02-2008, 09:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •