Its a altezza ,dont know were i got lexus from. But year its a Toyota Altezza RS200 3SGE Beams Auto Tiptronic Half Cut
hiro is on the money there. but it all comes down to what actually ends up on your garage floor 3sge/gte, 1j, 1g, 4age, 1uz most have been done already so the info is out there just have to dig for it.
130 series have a few similarities to 140 series. a good person to ask is javal.
RT104 with 4AGTE
Some assembly required
Its a altezza ,dont know were i got lexus from. But year its a Toyota Altezza RS200 3SGE Beams Auto Tiptronic Half Cut
Well, the Lexus IS200 is the same as an Altezza (apart from badges/engine options etc), but either way it's not a 3SGTE
And the auto BEAMS engines aren't as good as the manual ones (less compression, less power, milder cams, lower torque rpm peak etc)
AE102 - Charlene the Old Faithful, Reborn
JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
KE55 - Billie the Beast, sadly missed
Manunal it is. Just lucky i have the option of both close buy
So in my quest to find some info Ive found a site that some one has fitted a 3sge beams into a ke550 corrolla . ON size terms it looks very similar (are they?) even the crossmember looks to be the same.
Mounting.. | The Southern Collective
it'll fit.
motor is a front sump? crossmember and swaybar has a similar setup? then it should fit.
obviously youll need to fabricate some parts but if you want it to fit bad enough youll find a way to do it.
RT104 with 4AGTE
Some assembly required
130s are mid sump not front.
Cheers Brett.
yes 130's are mid sumped............... but a 3sge is not
That might pose an issue lol! You got the motor out of the xt yet? Really the centre of the xmember has to come back a few inches. Might be worth seeing if you can use a different one out of a celica or even a 140 series
1078542_10200240259680493_388145780_o.jpg1077884_10200240260360510_324818119_o.jpg1097645_10200240260080503_502725096_o.jpg
i think the front somp might jussssssst miss the crossmember if anything i could space it up to clear
http://www.thor-racing.co.uk/images/...top_beams3.jpg
And does anyone want anything from this engine? alot of the ignition system is fairly new
personally I would hang onto all the bits till your done just in case.
RT104 with 4AGTE
Some assembly required
the 1x aint going back in. Its stuffed
Never should have been there to begin with freakin terrible engine
yes...... Ive just given up. Its got a gremlin . One minute its running sweet then the timing is gone fule mixtures are up crap then it will run fine.
Today i even watched as the timing basicly ran away from the timing mark........... with out adjusting the dam thing
Small update.
My 3sge motor i was bidding on got sniped and i missed out. But iam still putting another engine in it.It will be a holden 202 rebuilt and a celica or supra gearbox behind it.
Reason for a 202 Its cheap and easy to work on and plenty of after market parts out there,
Also Got the starfire out today so in my eyes thats already a improvement
Bookmarks