Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 49

Thread: 4age/ze - Race Harmonic Balancers from $320

  1. #16
    Junior Member Conversion King
    Join Date
    May 2010
    Location
    ACT
    Posts
    2,510

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    GZE pulley is just a dual row 4AG pulley but the inside row diameter is different to accommodate the SC.

    Harmonically dampened GZE pullies are hard to come by and only second hand, new ones like T3 are aluminum only. 175mm would be great but requires a smaller idler pulley also. T3 recommend a 4AG NA alternator pulley, flipped backwards and shimmed out a touch. Otherwise 164mm is the largest bolt on upgrade without any further modification.
    Not sure if there's much market for them since 4AGTE is a common conversion these days, but if you wanna make a batch I'll definitely put my hand up for one.
    Autodub - 1987 AW11 G-Limited, Dark Blue Mica 4AGZE T-Top 4EAT

  2. #17
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Quote Originally Posted by maj View Post
    GZE pulley is just a dual row 4AG pulley but the inside row diameter is different to accommodate the SC.

    Harmonically dampened GZE pullies are hard to come by and only second hand, new ones like T3 are aluminum only. 175mm would be great but requires a smaller idler pulley also. T3 recommend a 4AG NA alternator pulley, flipped backwards and shimmed out a touch. Otherwise 164mm is the largest bolt on upgrade without any further modification.
    Not sure if there's much market for them since 4AGTE is a common conversion these days, but if you wanna make a batch I'll definitely put my hand up for one.
    Yep will look into it and get some pricings.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  3. #18
    Forum Member Grease Monkey
    Join Date
    Feb 2010
    Location
    Auckland
    Posts
    63

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    I got a stock GZE pully in the shed if you need measurements etc Barry.

  4. #19
    Junior Member Carport Converter Billzilla's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    1,427

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    I'm quite interested in that pulley with the trigger teeth & gear hanging off it.
    www.billzilla.org
    Toymods founding member #3

  5. #20
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Quote Originally Posted by Billzilla View Post
    I'm quite interested in that pulley with the trigger teeth & gear hanging off it.
    yep will get pricing up as soon as everything is finalised.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  6. #21
    SC14'd Member Domestic Engineer nick.parker's Avatar
    Join Date
    Nov 2005
    Location
    Canterbury
    Posts
    660

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    A 'dual key' option would be go nicely with the 9A cranks...
    == 4AGZE SC14 Supercharged ==
    Now flogg'n the SC14 @ 18psi....

  7. #22
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    These are dual key, but thats up to you if you want to use it.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  8. #23
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Bump, putting together this order now guys, let me know if you want to grab a pulley.
    There are no options yet for gilmour drives.

    We can do 4agze pulleys just need 1 to measure the diameter again as i lost all my measurements.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  9. #24
    Forum Member Grease Monkey
    Join Date
    Feb 2010
    Location
    Auckland
    Posts
    63

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    any indication on the GZE pully $$$ ?

  10. #25
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Quote Originally Posted by Stolic View Post
    any indication on the GZE pully $$$ ?
    Next week hopefully!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  11. #26
    SC14'd Member Domestic Engineer nick.parker's Avatar
    Join Date
    Nov 2005
    Location
    Canterbury
    Posts
    660

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Hi very keen on a 4AGZE one. Will it be possible to select the diameter of the supercharger part?
    (Or maybe come to a consensus that everybody goes for an over-sized unit?)
    Nick.
    == 4AGZE SC14 Supercharged ==
    Now flogg'n the SC14 @ 18psi....

  12. #27
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: More 4age goodness - Harmonic Balancers & Crank Scrapers

    Quote Originally Posted by nick.parker View Post
    Hi very keen on a 4AGZE one. Will it be possible to select the diameter of the supercharger part?
    (Or maybe come to a consensus that everybody goes for an over-sized unit?)
    Nick.
    What size pulley would everyone want on a 4agze?
    175mm being the largest for 14psi (then you will need a smaller tensioner pulley and a longer belt.)

    Most companies range from 165-175mm. I would prob go for the largest you can fit..
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  13. #28
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 4age/ze - Race Harmonic Balancers from $320

    Pricing is up for the double row.
    Lead time is 5 weeks to manufacture.

    We can add 4agze ones if people want them!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  14. #29
    SC14'd Member Domestic Engineer nick.parker's Avatar
    Join Date
    Nov 2005
    Location
    Canterbury
    Posts
    660

    Default Re: 4age/ze - Race Harmonic Balancers from $320

    Quote Originally Posted by Bazda View Post
    Pricing is up for the double row.
    Lead time is 5 weeks to manufacture. We can add 4agze ones if people want them!
    I would say 170mm.

    This basically spins the SC at its 10k rpm limit at engine redline ( 170/125 x 7500rpm = 10,200 supercharger rpm )
    == 4AGZE SC14 Supercharged ==
    Now flogg'n the SC14 @ 18psi....

  15. #30
    Cressidaspert Carport Converter andrew_mx83's Avatar
    Join Date
    Mar 2006
    Location
    Victoria
    Posts
    1,645

    Default Re: 4age/ze - Race Harmonic Balancers from $320

    Hi barry can you please get me a price for a 2 row, 5pk x 135mm harmonic balancer with a 35.10 ID
    Let me know if you need more measuments or a sample (suit 7m)

    Thanks
    There is no substitute for PUBIC inches

    Never late in an x8

Similar Threads

  1. AE82 and AE92 Harmonic Balancers : Are they the same?
    By Grega in forum Tech and Conversions
    Replies: 1
    Last Post: 18-03-2008, 10:18 AM
  2. crank scrapers- anything in it
    By Sam_Q in forum Tech and Conversions
    Replies: 47
    Last Post: 04-09-2007, 05:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •