Results 1 to 8 of 8

Thread: 20v Valve Train Package - Custom made by Ferrera

  1. #1
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default 20v Valve Train Package - Custom made by Ferrera

    Hey Guys,

    So we are planning on getting some custom 20v valve train package kits from Ferrera.
    They have designed a kit for the blacktop head which allows 12mm lift.
    The kit was designed for a guy in the USA who wanted the best of the best.

    The valves have been specially designed with a special shaped tulip on the stems and a flat face on the valves.
    Valve springs are based on the Moto GP bikes and good to 15k, comes with Titanium retainers.
    Note: The oem retainers cant be used in this setup.

    With mild porting the head flow is good for 280cfm plus! at 10.7mm lift.
    A supertech package is only good to 250cfm.

    Ferrera did extensive research and found in their design the valves would remain the stock size, this flowed the best at the high lift. Going over sized created shrouding issues at these lift levels. If the lift was under say 9mm then 1mm OS works better.


    The complete set is $1250AUD


    Its about $400AUD more than a supertech valve train setup but its gona flow a whole heap more!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  2. #2
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,243

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    what rpms would you need to be doing to make this worthwhile?
    1988 AW11 9A-GTE - Turbo Missile | 2004 Elise K20A - N/A Screamer | 1984 MA61 1JZ-GTE - 80s cruiser
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  3. #3
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    Quote Originally Posted by trdee View Post
    what rpms would you need to be doing to make this worthwhile?
    You would need around 9k.
    If you got smaller duration cams and made the lift near 10mm you could lower the RPM.
    Even the same lift but smaller duration like 272 not 300 then less rpm needed.

    I know im def getting this package for the best possible 20v BT head! No point getting the supertech stuff when for a bit more you can grab a whole heap more power. In Turbo form it will grab HEAPS more power. You could then run alot lower boost to get the power you want which means way less stress on the engine = will go forever!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  4. #4
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,243

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    9000rpm from the stroker is a fair bit though innit???
    1988 AW11 9A-GTE - Turbo Missile | 2004 Elise K20A - N/A Screamer | 1984 MA61 1JZ-GTE - 80s cruiser
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  5. #5
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    Quote Originally Posted by trdee View Post
    9000rpm from the stroker is a fair bit though innit???
    Its a bit but will easily get to those RPMs fine!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  6. #6
    That's me before i was a Conversion King -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,445

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    Damn you Vito. Baz, another good price on an impressive package.
    AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
    1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
    Toymods Club Member

  7. #7
    Toymods Events Secretary Too Much Toyota trdee's Avatar
    Join Date
    Jul 2007
    Location
    NSW
    Posts
    10,243

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    sooner or later you are going to cave and buy all this shit for your car garth. just accept that you will never be rid of the rolla.

    or get an AE86 to put this stuff into
    1988 AW11 9A-GTE - Turbo Missile | 2004 Elise K20A - N/A Screamer | 1984 MA61 1JZ-GTE - 80s cruiser
    Quote Originally Posted by Rex_Kelway View Post
    .....and the within first laps everything that made the AW11 great hit Rex as if the 'Gods of driving fun' had all Jizzed on his face.....
    Quote Originally Posted by JustenGT8 View Post
    Mono blocs mate....as close to yours as a Ferrari is to a Fiesta

  8. #8
    That's me before i was a Conversion King -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,445

    Default Re: 20v Valve Train Package - Custom made by Ferrera

    The only way i'd be buying everything for this engine is if (/once?) it looks almost certain there is going to be a 4A-GE powered replacement for it i could transfer it all into. I'm not putting a $10k engine in the rolla (unless i know i'll have something else to use it in). Right now, my heart is probably looking elsewhere, but who knows where it'll be once i actually have the coin burning a hole in my pocket. I'd really really like a silly 20V but it doesn't seem like the best use of spare dorrars right now...
    AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
    1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
    Toymods Club Member

Similar Threads

  1. 1jz HKS camshaft / Valve train noise
    By 131OWN in forum Tech and Conversions
    Replies: 5
    Last Post: 12-03-2009, 03:57 AM
  2. 2jz valve train in 1jz
    By tron in forum Tech and Conversions
    Replies: 6
    Last Post: 03-04-2007, 07:52 PM
  3. getting custom cables made?
    By bexi in forum Tech and Conversions
    Replies: 4
    Last Post: 28-09-2006, 06:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •