add me to the list to.
cheers.
i dont have a funny or cool signature.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
broken link above.
Manon Racing Products - New Zealand
i dont have a funny or cool signature.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
hrmm... who do i talk to about freight costs?
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Hi Bazada,
Is this all go and do you have a timeframe from moroso yet?
Yep Moroso are still working on the design. Trying to get 1 sump that fits all. 16v and 20v.
Hope they are done soon! they will update me next week.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
The sump design is nearly done! just making a few changes to the intake side kick out section as it wont fit FWD or MR2 with how big it is atm. So going to make that side a little smaller.
The flange on the sump will work with both 16v and 20v blocks (of course 7a as well).
A custom windage tray will have to be used with the 16v sump as the indent for the 20v block on the flange would interfare with the 16v windage tray. Or you can cut a small section out of the oem windage tray with some tin snips!. Moroso are going to design a windage tray to suit any how.
Also when using the sump on the 16v block the kit will come with a block off plate to cover over the 3x bolt holes used on the 20v blocks.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
So it's pretty much for 20v's blocks.
I may as well mod a stocker.
i dont have a funny or cool signature.
Its for both blocks. To allow 1 to fit all this is how the design is done.
As for the windage tray we can integrate the windage tray into the sump which bolts in and out. So that means you dont need to OEM windage tray which is quite a pain when putting the sump on. I think this is a better option!
Also these sumps have a much thicker flange (6mm thick) which also heps with block strengthening if your not using our crank girdle system. Plus the internal baffles and flaps have been properly designed and are not just thought up out of the blue.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
It's times like this I wish this forum had a "like" button
Will the windage tray clear the stroker crank and girdle etc?? Good to hear about the sump working on 16v too. Means I can bolt it onto my current 16v engine till the 9agte 20v is done
Ummm if your exhaust clears the stock sump will it clear this?
Mine has about 5mm of clearance....
Not a problem for AE86 guys but not being able to run off the shelf extractors without chopping them up is a minus
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Bookmarks