Page 1 of 3 123 LastLast
Results 1 to 15 of 34

Thread: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

  1. #1
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Hi Guys,

    MRP Corolla coilovers + some other models listed below. We have sold over 200 sets of these, the feedback has been fantastic!. Bang for buck vs Performance & Quality these can't be beaten.

    Toyota models we stock: $1350NZD delivered
    Corolla AE82/92/101/111
    MR2 AW11
    AE85/86
    Corolla AE92/101/111 With Inverted Shocks - $1750NZD delivered


    Our coilovers are made in one of the top factories in Taiwan who produces for MANY leading Japanese & American branded coilovers. Their machining and technical knowledge is the best I have come across, that is why we choose to use them to build our own range of MRP coilovers.
    All designs are developed in New Zealand and specifications sent to Taiwan - We review these back and forth many times until we come to an agreement on the specifications. This ensures we get proper spec'd shocks. Unlike other brands out there who use the same valving across their entire coilover range.

    These will be available in street/sport shock valving

    They come with a 1 year warranty with us and we will provide on going support if you end up damaging parts and need new shocks!,

    I cant stress the quality these are!! and for the price!!! you wont find anything better.
    Check out the pics!, performance tested since 2006 and everyone has been 100% happy with their results.

    All our coilovers come with the following features:
    Springs rates will be your choice
    Pillow ball mounts with Japanese made bearings Front & Rear
    Aluminium camber plates (Front only)
    Optional rear adjustable camber plate
    12 way adjustable shock absorber
    Extra strong steel powder coated lower mounts
    Fine threaded anodised bodies to reduce locking nuts from coming loose & corossion
    1 piece designed spring perch for easy pre load adjustment
    Specially designed non slip C spanners
    IP Synthetic shock oil
    Double O-ring seals
    46mm internal piston
    Mono tube (Inverted optional)
    All factory brackets for brake lines & anti roll bar mount points
    Shock Dyno graph
    Non slip C-spanners, adjusters and shock dyno graph


    AE92 AE101 AE111


    AE82


    AE86


    AW11


    Starlet EP70/82/91


    Extra strong 1-piece spring perch



    From 2013 all our Corolla FWD coilovers come with extended rear damper adjusters.
    Meaning you don't need to remove the rear seats and tray to make changes, just a simple hole in the parcel tray for these to poke through.
    Last edited by Bazda; 05-10-2013 at 06:12 PM.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  2. #2
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Bumping this back up.
    These are super popular on other Toyota Forums
    Spread the word on these across Toymods!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  3. #3
    Junior Member Grease Monkey
    Join Date
    Oct 2009
    Location
    Victoria
    Posts
    136

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Ill be including info on these in my build log when mine arrive will have to get another set for just track use later on

  4. #4
    Estranged Member Chief Engine Builder mullett's Avatar
    Join Date
    Jan 2006
    Location
    WA
    Posts
    3,369

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Is there a possibility of doing front only coilovers? IE to suit MA61 for example?

  5. #5
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Quote Originally Posted by mullett View Post
    Is there a possibility of doing front only coilovers? IE to suit MA61 for example?
    Possibly a weld in type to the stock strut. But at this stage no, later in the future!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  6. #6
    1MZ > 2JZ Carport Converter knightrous's Avatar
    Join Date
    Jul 2009
    Location
    NSW
    Posts
    1,785

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    What's the price for a set of inverted coilovers suit 87-89 AW11.
    Also, what are the dampners like in comparison to say, Koni yellows?

  7. #7
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Quote Originally Posted by knightrous View Post
    What's the price for a set of inverted coilovers suit 87-89 AW11.
    Also, what are the dampners like in comparison to say, Koni yellows?
    The Inverted ones for the AW11 are $1375AUD Delivered.

    The street valved ones are pretty similar in firmness to say stock shocks and King springs on their softest setting.
    They can be turned up quite a bit stiffer as well. But they will feel much nicer than stock shocks on kings as the springs are matched to the dampers.

    I cant make a direct comparison to Koni as i've never used Konis but all the Corolla track guys i've supplied these to who were on Koni Yellows said these were a huge improvement on the circuit (using our Sports valving). They also said the ride on the street was actually not too bad and soaked up bumps well.

    We have heaps of Corolla guys riding on these are they are all impressed with the ride quality. We have spent years working on coilovers and getting them right.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  8. #8
    1MZ > 2JZ Carport Converter knightrous's Avatar
    Join Date
    Jul 2009
    Location
    NSW
    Posts
    1,785

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Thanks for the info Barry.
    I'll have to replace my Koni's in my AW11 in the next year or so as they are fairly old, so I might just start looking at these as an alternative.

  9. #9
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Quote Originally Posted by knightrous View Post
    Thanks for the info Barry.
    I'll have to replace my Koni's in my AW11 in the next year or so as they are fairly old, so I might just start looking at these as an alternative.
    No worries, when your ready we will be here.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  10. #10
    Forum Member 1st year Apprentice
    Join Date
    Aug 2009
    Location
    nsw
    Posts
    6

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    any chance of front coilovers set up for a ke20 ?

  11. #11
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Quote Originally Posted by toylova View Post
    any chance of front coilovers set up for a ke20 ?
    Yep the AE86 setup works on the KE chassis, all we change is the front camber plate as the bolt hole pattern is different.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  12. #12
    Forum Member 1st year Apprentice
    Join Date
    Aug 2009
    Location
    nsw
    Posts
    6

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    pm with cost for this setup delivered to australia sydney 2760

  13. #13
    Forum Member 1st year Apprentice
    Join Date
    Nov 2011
    Location
    NSW
    Posts
    33

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    PM sent re: AW11 with street valving pricing

  14. #14
    Your mum is a Conversion King TERRA Operative's Avatar
    Join Date
    Mar 2007
    Location
    Chiba
    Posts
    2,232

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Registering tentative interest for the AE101 Levin. I've got an old set of BC coilovers that may need an upgrade in the new year......

    What is a set worth in sport valving, both standard and inverted style with the optional rear camber plates? (Heavy street use, so whatever springs you suggest, 8/6 or 6/4 front/rear?)

  15. #15
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Custom Made Coilovers - Corolla, Cressida, Supra, Celica, AE86 + More

    Quote Originally Posted by TERRA Operative View Post
    Registering tentative interest for the AE101 Levin. I've got an old set of BC coilovers that may need an upgrade in the new year......

    What is a set worth in sport valving, both standard and inverted style with the optional rear camber plates? (Heavy street use, so whatever springs you suggest, 8/6 or 6/4 front/rear?)
    Will pm you!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •