Results 1 to 5 of 5

Thread: 1JZ-GTE Non VVT intake and exhaust camshaft

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jun 2011
    Location
    Western Australia
    Posts
    40

    Default 1JZ-GTE Non VVT intake and exhaust camshaft

    Is intake and exhaust cam on 1JZ-GTE Non VVT-i head interchangable between each other?

  2. #2
    Junior Member Grease Monkey stealth's Avatar
    Join Date
    Jul 2012
    Location
    Western Australia
    Posts
    79

    Default Re: 1JZ-GTE Non VVT intake and exhaust camshaft

    nope. different specs, close though. It may run, but id say adjustable cam gears would be needed at the least.

    (intake, exhaust)
    1JZ-GTE (factory cams)
    lift: 7.69, 7.95
    duration (adv): 224, 228
    duration @ .050": 189.1, 194.1
    lobe: centre
    JZA63 Celica 13.9 @ 162km/h

  3. #3
    Forum Member 1st year Apprentice
    Join Date
    Jun 2011
    Location
    Western Australia
    Posts
    40

    Default Re: 1JZ-GTE Non VVT intake and exhaust camshaft

    I am concern about the fitment. Wish they were the same as 4AGE 16V where exhaust cam can be used as intake cam..

    can anyone else verify this?

  4. #4
    Junior Member Grease Monkey
    Join Date
    Dec 2005
    Location
    Wgtn
    Posts
    107

    Default Re: 1JZ-GTE Non VVT intake and exhaust camshaft

    Even if it did fit, the exhaust cam doesn't have the lobes for the 2 cam position sensors.

  5. #5
    Forum Member 1st year Apprentice
    Join Date
    Jun 2011
    Location
    Western Australia
    Posts
    40

    Default Re: 1JZ-GTE Non VVT intake and exhaust camshaft

    So theoretically, they both are not interchangeable?

Similar Threads

  1. bigger exhaust cam than intake
    By DeftAnesthetik in forum Tech and Conversions
    Replies: 27
    Last Post: 14-05-2008, 02:06 AM
  2. Replies: 93
    Last Post: 07-04-2006, 11:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •