Results 1 to 2 of 2

Thread: 1jz vaccum needs

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Aug 2011
    Location
    qld
    Posts
    43

    Default 1jz vaccum needs

    Hey guys, so have a 1.5jz as most of you know. It is running a single turbo t04z and aftermarket intake plenum.

    I have retained the iscv etc but need to know, now I no longer have all the vaccum points where or what actually needs vaccum??

    Power steering no longer needs it as its running a Nissan power steering hose there's no bov as of yet that's down the track

    So it will be:
    Map
    Iscv
    Gate
    Aac
    Sard fuel reg (no longer running 1jz)
    Boost gauge/controller

    Now with the controller and gauge I'm assuming I can plumb into the map line correct?? :s

    Also where does the pcv now go??

  2. #2
    Junior Member Grease Monkey BEVANI's Avatar
    Join Date
    Apr 2008
    Location
    ACT
    Posts
    188

    Default Re: 1jz vaccum needs

    id run the pcv into a catch can and either vent to atmosphere or back to inlet pre turbo.
    dont forget the brake booster hose!
    If in doubt, drift her out! Steer from the rear! less traction,more action! simple!
    ░░▒▒▒▓████
    BURN RUBBER
    ░░▒▒▒▓████ JZA61 FTW!

Similar Threads

  1. 1JZ Vaccum lines
    By rob_o in forum Tech and Conversions
    Replies: 18
    Last Post: 01-08-2007, 09:35 AM
  2. 3T carby vaccum connections
    By edwinj in forum Tech and Conversions
    Replies: 3
    Last Post: 14-02-2007, 03:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •