Results 1 to 6 of 6

Thread: Want a 1jz-gte with r154 please!!

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Oct 2010
    Location
    Victoria
    Posts
    10

    Default Want a 1jz-gte with r154 please!!

    As title states I want a 1j setup to throw at my rt142
    Hit me up with anything u have!

    New to the forum so if I'm in the wrong spot let me know

    Cheers
    Brendan!

  2. #2
    Lexus wiring junky Grease Monkey Demon's Avatar
    Join Date
    Oct 2009
    Location
    South Africa
    Posts
    100

    Default Re: Want a 1jz-gte with r154 please!!

    Howzit and welcome....

    Going to be a hard find on the 1JZ with the R154 and the price has also gone up on these units...seen a few here and almost bought a front cut R154
    so that I could do the swap from auto to manual....

    Maybe you could find a lose box somwhere and buy all the flywheel bits and so on....but at a price again.....maybe the auto route as those come in real cheap.

    What management system are you thinking of ?

  3. #3
    Lexus wiring junky Grease Monkey Demon's Avatar
    Join Date
    Oct 2009
    Location
    South Africa
    Posts
    100

    Default Re: Want a 1jz-gte with r154 please!!

    Looks like you started two of the same threads

  4. #4
    Forum Member 1st year Apprentice
    Join Date
    Oct 2010
    Location
    Victoria
    Posts
    10

    Default Re: Want a 1jz-gte with r154 please!!

    Yeh man bit of a balls up there!! not to sure how to delete either???

    Here is my story.
    Had coronas around scince my mum and dad bought an 85 rt142 sr brand new for about $13000 when i was a year old
    About 2 years ago i got hold of this rig i have at the minute and someone had bolted a turbo on the side of the 22re no ems standard everything and it ran like a bucket of snot.
    I did the s13 conversion in the front end and Ive now decided that i want to do and engine conversion plan is to use it as a track car.

    Maybe there are better options out there for a conversion but i like the 1j. Anyone have any feedback on other options for my aplication.
    I know there is talk around about how a 1g-gte would fit well with less weight etc. I was hoping to create some discussion to get a feel for what is the go! sr20? 1g? 1j? ca18? i dont know

    Cheers for the post Demon

  5. #5
    Junior Member Domestic Engineer
    Join Date
    May 2007
    Location
    qld
    Posts
    758

    Default Re: Want a 1jz-gte with r154 please!!

    i have a mostly complete 1jz with loom but no ecu...
    in bris though
    might also have clutch flywheel pressure plate

    let me know ill work out a deal
    SPARCO|TEIN|SUPERPRO|SELBYS SWAY BARS|PERFORMANCE PARTS AND APPAREL LIKE US ON FACEBOOK!

  6. #6
    Forum Member
    Join Date
    Aug 2011
    Location
    Western Australia
    Posts
    2

    Default Re: Want a 1jz-gte with r154 please!!

    hey i have a steel housing r254 gearbox, apparantly very similiar to many r gearboxs, Ive heard they are near bullet proof, but unable to verify any ratios, thinking I would part from it for around 800, bought it for a 1jz engine conversion into my mark2 corona, but project is most likely not going to happen

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •