Results 1 to 2 of 2

Thread: w56/7/8 manual and A43d auto tailshaft different output splines

  1. #1
    Forum Member
    Join Date
    Jul 2012
    Location
    nsw
    Posts
    2

    Default w56/7/8 manual and A43d auto tailshaft different output splines

    Hi everyone
    I'm about to undertake an engine conversion from a 5me to a 6mge into my ms123 crown with a w series manual conversion aswell.
    What I'm am keen to know before I start stripping the crown and the donor ma61, is if the output splines on the manual tailshaft are similar to the splines on the a43 auto shaft?
    I have done searches but nothing has answered my question.
    If someone can answer this for me I would be overly greatful
    Thanks
    Mitch

  2. #2
    Forum Member 1st year Apprentice
    Join Date
    Dec 2011
    Location
    SA
    Posts
    8

    Default Re: w56/7/8 manual and A43d auto tailshaft different output splines

    Hi biglad,
    I can confirm that the output splines will be the same, but length may be a problem.
    If your crown has an A43d you should be fine, but if you have an A43DL or A43DE, your tailshaft is goin to be 60-80 mm too short. It might pay to also check your vehicle details, I'm not 100% but I thought the MS123 only came with a 5MGE or 6MGE backed by an A43DE, I think the MS112 came out with a 5ME and A43D...

Similar Threads

  1. Supra auto vs manual tailshaft the same?
    By 1JZ-Rolla in forum Tech and Conversions
    Replies: 2
    Last Post: 14-07-2009, 12:01 PM
  2. A43D Auto Trans Mods
    By Blinga_22rte in forum Tech and Conversions
    Replies: 7
    Last Post: 09-01-2007, 09:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •